• Y.I. Kim, A. Heo, E.-S. Kim
  Kyungpook National University, Daegu
• S.T. Boogert
  Royal Holloway, University of London, Surrey
• Y. Honda, T. Tauchi, N. Terunuma
  KEK, Ibaraki
• J. May, D.J. McCormick, T.J. Smith
  SLAC, Menlo Park, California

Nanometer resolution Beam Position Monitors have been developed to measure and control beam position stability at the interaction point region of ATF2. The position of the beam focused has to be measured within a few nanometer resolution at the interaction point. In order to achieve this performance, electronics for this BPM was developed. Every component of the electronics have been simulated and checked by local test and using beam signal. We will explain each component and define their working range. Then, we will show the performance of the electronics measured with beam signal.

• S.T. Boogert, G.E. Boorman, C. Swinson
  JAI, Oxford
• R. Ainsworth, S. Molloy
  Royal Holloway, University of London, Surrey
• A.S. Aryshev, Y. Honda, T. Tauchi, N. Terunuma, J. Urakawa
  KEK, Ibaraki
• J.C. Frisch, J. May, D.J. McCormick, J. Nelson, T.J. Smith, G.R. White, M. Woodley
  SLAC, Menlo Park, California
• A. Heo, E.-S. Kim, H.-S. Kim, Y.I. Kim
  Kyungpook National University, Daegu
• A. Lyapin
  UCL, London
• H.K. Park
  KNU, Deagu
• M.C. Ross
  Fermilab, Batavia
• S. Shin
  PLS, Pohang

The Accelerator Test Facility 2 (ATF2) in KEK, Japan, is a prototype scaled demonstrator system for the final focus required for a lepton linear collider. The ATF2 beam-line is instrumented with a total of 38 C and S band resonant cavity beam position monitors (BPM) with associated mixer electronics and digitizers. The current status of the BPM system is described, with a focus on operational techniques and performance.