• D. Trbojevic, J. Beebe-Wang, X. Chang, Y. Hao, A. Kayran, V. Litvinenko, B. Parker, V. Ptitsyn, N. Tsoupas
  BNL, Upton, Long Island, New York
• E. Pozdeyev
  FRIB, East Lansing, Michigan

We present a medium-energy (4 GeV) electron ion collider (MeRHIC) lattice design for the Relativistic Heavy Ion Collider (RHIC). MeRHIC represents a staged approach towards the higher energy eRHIC, with MeRHIC hardware being reused for eRHIC. The lattice design includes two Energy Recovery Linacs (ERLs), multiple isochronous arcs connected to the ERLs, an interaction region design, a low energy ERL with a polarized electron source, and connecting beam lines.

* V. Litvinenko, proceedings from this conference.

• Y. Hao, P. He, A.K. Jain, V. Litvinenko, G.J. Mahler, W. Meng, J.E. Tuozzolo
  BNL, Upton, Long Island, New York

In this paper we present the design and prototype measurement of small gap (5mm to 10 mm aperture) dipole and quadrupole for the future high energy ERL (Energy Recovery Linac). The small gap magnets have the potential of largely reducing the cost of the future electron-ion collider project, eRHIC, which requires a 10GeV to 30 GeV ERL with up to 6 energy recovery passes (3.8 km each pass). We also studied the sensitivity of the energy recovery pass and the alignment error in this small magnets structure and countermeasure methods.

• Y. Hao, V. Litvinenko, V. Ptitsyn
  BNL, Upton, Long Island, New York

Beam-beam effects in eRHIC have a number of unique features, which distinguish them from both hadron and lepton colliders. Due to beam-beam interaction, both electron and hadron beams would suffer quality degradation or beam loss from without proper treatments. Those features need novel study and dedicate countermeasures. We study the beam dynamics and resulting luminosity of the characteristics, including mismatch, disruption and pinch effects on electron beam, in additional to their consequences on the opposing beam as a wake field and other incoherent effects of hadron beam. We also carry out countermeasures to prevent beam quality degrade and coherent instability.

• Y. Hao, J. Kewisch, V. Litvinenko, E. Pozdeyev, V. Ptitsyn, D. Trbojevic, N. Tsoupas
  BNL, Upton, Long Island, New York

In this paper, we analyzed the linac optics design requirement for a multi-pass energy recovery linac (ERL) with one or more linacs. A set of general formula of constrains for the 2-D transverse matrix is derived to ensure design optics acceptance matching throughout the entire accelerating and decelerating process. Meanwhile, the rest free parameters can be adjusted for fulfilling other requirements or optimization purpose. As an example, we design the linac optics for the future MeRHIC (Medium Energy eRHIC) project and the optimization for enlarging the BBU threshold.

• G. Wang, M. Blaskiewicz, A.V. Fedotov, Y. Hao, J. Kewisch, V. Litvinenko, E. Pozdeyev, V. Ptitsyn
  BNL, Upton, Long Island, New York

We present our studies on various aspects of the beam dynamics in 'racetrack' design of the first stage electron-ion collider at RHIC (eRHIC), including transverse beam break up instabilities, electron beam emittance growth and energy loss due to synchrotron radiation, electron beam losses due to Touschek effects and residue gas scattering, beam-beam effects at the interaction region and emittance growth of ion beam due to electron bunch to bunch noises. For all effects considered above, no showstopper has been found.

• K.A. Brown, L. Ahrens, M. Bai, J. Beebe-Wang, M. Blaskiewicz, J.M. Brennan, D. Bruno, C. Carlson, R. Connolly, T. D'Ottavio, R. De Maria, K.A. Drees, W. Fischer, W. Fu, C.J. Gardner, D.M. Gassner, J.W. Glenn, Y. Hao, M. Harvey, T. Hayes, L.T. Hoff, H. Huang, J.S. Laster, R.C. Lee, V. Litvinenko, Y. Luo, W.W. MacKay, M. Mapes, G.J. Marr, A. Marusic, K. Mernick, R.J. Michnoff, M.G. Minty, C. Montag, J. Morris, S. Nemesure, B. Oerter, F.C. Pilat, V. Ptitsyn, G. Robert-Demolaize, T. Roser, T. Russo, P. Sampson, J. Sandberg, T. Satogata, V. Schoefer, C. Schultheiss, F. Severino, K. Smith, D. Steski, S. Tepikian, C. Theisen, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, G. Wang, M. Wilinski, A. Zaltsman, K. Zeno, S.Y. Zhang
  BNL, Upton, Long Island, New York

Since the last successful RHIC Au+Au run in 2007 (Run7), the RHIC experiments have made numerous detector improvements and upgrades. In order to benefit from the enhanced detector capabilities and to increase the yield of rare events in the acquired heavy ion data a significant increase in luminosity is essential. In Run7 RHIC achieved an average store luminosity of <L>=12x10²⁶ cm^-2 s^-1 by operating with 103 bunches (out of 110 possible), and by squeezing to β*=0.8 m. Our goal for this year's run, Run10, was to achieve an average of <L>=27x10²⁶ cm^-2 s^-1. The measures taken were decreasing β* to 0.6 m, and reducing longitudinal and transverse emittances by means of bunched-beam stochastic cooling. In addition we introduced a lattice to suppress intra-beam scattering (IBS) in both RHIC rings, upgraded the RF system, and separated transition crossings in both rings while ramping. We present an overview of the changes and the results in terms of Run10 increased instantaneous luminosity, luminosity lifetime, and integrated luminosity.