• B. Cheymol, E. Bravin, D. Gerard, U. Raich, F. Roncarolo
  CERN, Geneva

As part of the CERN LHC injector chain upgrade, LINAC4 will accelerate H^- ions from 45 keV to 160 MeV. A movable diagnostics test bench will be used to measure the beam parameters during the different construction stages (at 45 keV, 3 MeV and 12 MeV) at first in a laboratory setup and later in the LINAC4 tunnel. Given the beam properties at 3 and 12 MeV, the existing slit-grid system developed for the measurement of the transverse emittance at the source (45 keV) cannot be reused at these higher energies. At 3MeV and above the energy deposition would damage the steel slit in a single LINAC4 pulse. For this reason a new slit has been designed following detailed analytical and numerical simulations for different materials and geometries. The energy deposition patterns as simulated by FLUKA for the different cases are presented in detail. In addition, the choice of SEM grid wires for achieving the required measurement accuracy in terms of material, diameter and spacing, are discussed.