CASA, newport news
JLAB, Newport News, Virginia
A unique design feature of a polarized Medium Energy Electron-Ion Collider (MEIC) based on CEBAF is its 'Figure-8' storage rings for both electrons and ions, which significantly simplifies beam polarization maintenance and manipulation. While electron (positron) polarization is maintained vertical in arcs of the ring, a stable longitudinal spin at four collision points is achieved through solenoid based spin rotators and horizontal orbit bends. The proposed MEIC lattice was developed in order to preserve a very high polarization (more than 70%) of the electron beams injected from the CEBAF machine. The otherwise coupled beam trajectory due to solenoids used in the spin rotators was decoupled by design. Aspin matching technique needs to be implemented in order to enhance quantum self-polarization and minimize depolarization effects.
CASA, newport news
JLAB, Newport News, Virginia
The proposed electron collider lattice exhibits low β- functions at the Interaction Point (IP) (βx∗100mm − βy∗ 20 mm) and rather large equilibrium momentum spread of the collider ring (δp/p = 0.00158). Both features make the chromatic corrections of paramount importance. Here the chromatic effects of the final focus quadruples are cor- rected both locally and globally. Local correction features symmetric sextupole families around the IP, the betatron phase advances from the IP to the sextupoles are chosen to eliminate the second order chromatic aberration. Global interleaved families of sextupoles are placed in the figure-8 arc sections, and non-interleaved families at straight sec- tion making use of the freely propagated dispersion wave from the arcs. This strategy minimizes the required sex- tupole strength and eventually leads to larger dynamic aper- ture of the collider. The resulting spherical aberrations induced by the sextupoles are mitigated by design; the straight and arc sections optics features an inverse identity transformation between sextupoles in each pair.
Imperial College of Science and Technology, Department of Physics, London
BNL, Upton, Long Island, New York
JLAB, Newport News, Virginia
STFC/RAL/ASTeC, Chilton, Didcot, Oxon
The IDS study showed that a Neutrino Factory seems to be the most promising candidate for the next phase of high precision neutrino oscillation experiments. A part of the increased precision is due to the fact that in a Neutrino Factory the decay of muons produces a neutrino beam with narrow energy distribution and divergence. The effect of beam loading on the energy distribution of the muon beam in the Neutrino Factory has been investigated numerically. The simulations have been performed using the baseline accelerator design including cavities for different number of bunch trains and bunch train timing. A detailed analysis of the beam energy distribution expected is given together with a discussion of the energy spread produced by the gutter acceleration in the FFAG and the implications for the neutrino oscillation experiments will be presented.
ODU, Norfolk, Virginia
JLAB, Newport News, Virginia
BNL, Upton, Long Island, New York
Recirculating linear accelerators (RLA) are the most likely means to achieve the rapid acceleration of short-lived muons to multi-GeV energies required for Neutrino Factories and TeV energies required for Muon Colliders. In the work described here, a novel arc optics based on a Non Scaling Fixed Field Alternating Gradient (NS-FFAG) lattice is developed, which would provide sufficient momentum acceptance to allow multiple passes (two or more consecutive energies) to be transported in one string of magnets. We present a combination of the non-scaling NS-FFAG RLA placed in a straight section. Orbit offsets of different energy muons are kept small in the NS-FFAG arcs during multiple passes. The NS-FFAG, made of densely packed FODO cells, allows momentum acceptance of dp/p=±60%. This solution would reduce overall cost and simplify the operation. Difference in a muon path length for corresponding energies is corrected with a chicane. We will also discuss technical requirements to allow the maximum number of passes by using an adjustable path length to accurately control the returned beam phase to synchronize with the RF.
JLAB, Newport News, Virginia
Muons, Inc, Batavia
Neutrino Factories and Muon Colliders require rapid acceleration of short-lived muons to multi-GeV and TeV energies. A Recirculating Linear Accelerator (RLA) that uses superconducting RF structures can provide exceptionally fast and economical acceleration to the extent that the focusing range of the RLA quadrupoles allows each muon to pass several times through each high-gradient cavity. A new concept of rapidly changing the strength of the RLA focusing quadrupoles as the muons gain energy is being developed to increase the number of passes that each muon will make in the RF cavities, leading to greater cost effectiveness. We discuss the optics and technical requirements for RLA designs, using RF cavities capable of simultaneous acceleration of both μ+ and μ- species, with pulsed Linac quadrupoles and arc magnets to allow the maximum number of passes. The design will include the optics for the multi-pass linac and droplet-shaped return arcs.
Imperial College of Science and Technology, Department of Physics, London
JLAB, Newport News, Virginia
International Design Study for the Neutrino Factory (IDS-NF) assumes the first stage of muon acceleration (up to 900 MeV) to be implemented with a solenoid based Linac. The Linac consists of three styles of cryo-modules,containing focusing solenoids and varying number of SRF cavities for acceleration. Fringe fields of the solenoids and the focusing effects in the SRF cavities have significant impact on the transverse beam dynamics. Using an analytical formula,the effects of fringe fields and cavities are studied in MAD-X. The resulting betatron functions are compared with the results of beam dynamics simulations using OptiM code.
Imperial College of Science and Technology, Department of Physics, London
JLAB, Newport News, Virginia
Within the Neutrino Factory Project the muon acceleration process involves a complex chain of accelerators including a (single-pass) linac, two recirculating linacs and an FFAG. The linac consists of RF cavities and iron shielded solenoids for transverse focusing and has been previously designed relying on idealized field models. However, to predict accurately the transport and acceleration of a high emittance 30 cm wide beam with 10 % energy spread requires detailed knowledge of fringe field distributions. This article presents results of the front-to-end tracking of the muon beam through numerically simulated realistic field distributions for the shielded solenoids and the RF fields. Real and phase space evolution of the beam has been studied along the linac and the results will be presented and discussed.