• F. Caspers, M. Betz, A. Grudiev
  CERN, Geneva
• H. Sapotta
  University of Applied Sciences Karlsruhe, Karlsruhe

In many particle accelerators considerable amounts of RF power reaching the megawatt level are converted into heat in dummy loads. After an overview of RF power in the range 200 MHz to 1 GHz dissipated at CERN we discuss several developments that had come up in the past using vacuum tube technology for RF-DC conversion. Amongst those the developments the cyclotron wave converter CWC appears most suitable. With the availability of powerful Schottky diodes the solid state converter aspect has to be addressed as well. One of the biggest problems of Schottky diode based structures is the junction capacity. GaAs and GaN Schottky diodes show a significant reduction of this junction capacity as compared to silicon. Small rectenna type converter units which had been already developed for microwave powered helicopters can be used in waveguides or with coaxial power dividers.