ICALEPCS2015 - List of Authors (Sakurai, T.)

Paper

Title

Page

Control System for a Dedicated Accelerator for SACLA Wide-Band Beam Line

74

N. Hosoda, T. Fukui
RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
M. Ishii
JASRI/SPring-8, Hyogo-ken, Japan
T. Ohshima, T. Sakurai, H. Takebe
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan

This paper report about a control system for a dedicated accelerator for SACLA wide-band beam line (BL1), requirements, construction strategies, and present status. At the upgrade plan of SACLA BL1, it was decided to move SCSS test accelerator, which operated from 2005 to 2013, to the upstream of the BL1 in the undulator hall. The control system of the accelerator had to be operated seamlessly with SACLA, to reuse old components as much as possible, and to avoid stopping SACLA user experiments during the start up. The system was constructed with MADOCA which is already used at SACLA. In the control components, VME optical DIO cards and chassis for magnet power supplies were reused after cleaning and checking that there was no degradation of quality. The RF conditioning of the accelerator was started in in October 2014, while SACLA user experiments were going on. A data collection system was prepared, myCC, having a MADOCA compatible interface and an independent database from SACLA. It enabled efficient start up and after enough debugging, the data collection was successfully merged to SACLA in January 2015. Beam commissioning of the accelerator is planned for autumn 2015.

Slides MOM305 [0.969 MB]

Poster MOM305 [0.368 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper	Title	Page
MOM305	Control System for a Dedicated Accelerator for SACLA Wide-Band Beam Line	74
	N. Hosoda, T. Fukui RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan M. Ishii JASRI/SPring-8, Hyogo-ken, Japan T. Ohshima, T. Sakurai, H. Takebe RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
	This paper report about a control system for a dedicated accelerator for SACLA wide-band beam line (BL1), requirements, construction strategies, and present status. At the upgrade plan of SACLA BL1, it was decided to move SCSS test accelerator, which operated from 2005 to 2013, to the upstream of the BL1 in the undulator hall. The control system of the accelerator had to be operated seamlessly with SACLA, to reuse old components as much as possible, and to avoid stopping SACLA user experiments during the start up. The system was constructed with MADOCA which is already used at SACLA. In the control components, VME optical DIO cards and chassis for magnet power supplies were reused after cleaning and checking that there was no degradation of quality. The RF conditioning of the accelerator was started in in October 2014, while SACLA user experiments were going on. A data collection system was prepared, myCC, having a MADOCA compatible interface and an independent database from SACLA. It enabled efficient start up and after enough debugging, the data collection was successfully merged to SACLA in January 2015. Beam commissioning of the accelerator is planned for autumn 2015.
	Slides MOM305 [0.969 MB]
	Poster MOM305 [0.368 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)