ICALEPCS2015 - List of Authors (Piotrowski, A.)

Paper	Title	Page
MOC3O07	Low Level RF Control Implementation and Simultaneous Operation of Two FEL Undulator Beamlines at FLASH	42
	V. Ayvazyan, S. Ackermann, J. Branlard, B. Faatz, M.K. Grecki, O. Hensler, S. Pfeiffer, H. Schlarb, Ch. Schmidt, M. Scholz, S. Schreiber DESY, Hamburg, Germany A. Piotrowski FastLogic Sp. z o.o., Łódź, Poland
	The Free-Electron Laser in Hamburg (FLASH) is a user facility delivering femtosecond short radiation pulses in the wavelength range between 4.2 and 45 nm using the SASE principle. The tests performed in the last few years have shown that two FLASH undulator beamlines can deliver FEL radiation simultaneously to users with a large variety of parameters such as radiation wavelength, pulse duration, intra-bunch spacing etc. FLASH has two injector lasers on the cathode of the gun to deliver different bunch trains with different charges, needed for different bunch lengths. Because the compression settings depend on the charge of bunches the low level RF system needs to be able to supply different compression for both beamlines. The functionality of the controller has been extended to provide intra-pulse amplitude and phase changes while maintaining the RF field amplitude and the phase stability requirements. The RF parameter adjustment and tuning for RF gun and accelerating modules can be done independently for both laser systems. Having different amplitudes and phases within the RF pulse in several RF stations simultaneous lasing of both systems has been demonstrated.
	Slides MOC3O07 [4.645 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGF015	Drivers and Software for MicroTCA.4	725
	M. Killenberg, M. Heuer, M. Hierholzer, L.P. Petrosyan, Ch. Schmidt, N. Shehzad, G. Varghese, M. Viti DESY, Hamburg, Germany T. Kozak, P. Prędki, J. Wychowaniak TUL-DMCS, Łódź, Poland S. Marsching Aquenos GmbH, Baden-Baden, Germany M. Mehle, T. Sušnik, K. Žagar Cosylab, Ljubljana, Slovenia A. Piotrowski FastLogic Sp. z o.o., Łódź, Poland
	Funding: This work is supported by the Helmholtz Validation Fund HVF-0016 'MTCA.4 for Industry'. The MicroTCA.4 crate standard provides a powerful electronic platform for digital and analogue signal processing. Besides excellent hardware modularity, it is the software reliability and flexibility as well as the easy integration into existing software infrastructures that will drive the widespread adoption of the new standard. The DESY MicroTCA.4 User Tool Kit (MTCA4U) comprises three main components: A Linux device driver, a C++ API for accessing the MicroTCA.4 devices and a control system interface layer. The main focus of the tool kit is flexibility to enable fast development. The universal, expandable PCI Express driver and a register mapping library allow out of the box operation of all MicroTCA.4 devices which are running firmware developed with the DESY board support package. The tool kit has recently been extended with features like command line tools and language bindings to Python and Matlab.
	Poster WEPGF015 [0.540 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGF029	High Level Software Structure for the European XFEL LLRF System	757
	Ch. Schmidt, V. Ayvazyan, J. Branlard, Ł. Butkowski, O. Hensler, M. Killenberg, M. Omet, S. Pfeiffer, K.P. Przygoda, H. Schlarb DESY, Hamburg, Germany W. Cichalewski, F. Makowski TUL-DMCS, Łódź, Poland A. Piotrowski FastLogic Sp. z o.o., Łódź, Poland
	The Low level RF system for the European XFEL is controlling the accelerating RF fields in order to meet the specifications of the electron bunch parameters. A hardware platform based on the MicroTCA.4 standard has been chosen, to realize a reliable, remotely maintainable and high performing integrated system. Fast data transfer and processing is done by field programmable gate arrays (FPGA) within the crate, controlled by a CPU via PCIe communication. In addition to the MTCA system, the LLRF comprises external supporting modules also requiring control and monitoring software. In this paper the LLRF system high level software used in E-XFEL is presented. It is implemented as a semi-distributed architecture of front end server instances in combination with direct FPGA communication using fast optical links. Miscellaneous server tasks have to be executed, e.g. fast data acquisition and distribution, adaptation algorithms and updating controller parameters. Furthermore the inter-server data communication and integration within the control system environment as well as the interface to other subsystems are described.
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Low Level RF Control Implementation and Simultaneous Operation of Two FEL Undulator Beamlines at FLASH

42

V. Ayvazyan, S. Ackermann, J. Branlard, B. Faatz, M.K. Grecki, O. Hensler, S. Pfeiffer, H. Schlarb, Ch. Schmidt, M. Scholz, S. Schreiber
DESY, Hamburg, Germany
A. Piotrowski
FastLogic Sp. z o.o., Łódź, Poland

The Free-Electron Laser in Hamburg (FLASH) is a user facility delivering femtosecond short radiation pulses in the wavelength range between 4.2 and 45 nm using the SASE principle. The tests performed in the last few years have shown that two FLASH undulator beamlines can deliver FEL radiation simultaneously to users with a large variety of parameters such as radiation wavelength, pulse duration, intra-bunch spacing etc. FLASH has two injector lasers on the cathode of the gun to deliver different bunch trains with different charges, needed for different bunch lengths. Because the compression settings depend on the charge of bunches the low level RF system needs to be able to supply different compression for both beamlines. The functionality of the controller has been extended to provide intra-pulse amplitude and phase changes while maintaining the RF field amplitude and the phase stability requirements. The RF parameter adjustment and tuning for RF gun and accelerating modules can be done independently for both laser systems. Having different amplitudes and phases within the RF pulse in several RF stations simultaneous lasing of both systems has been demonstrated.

Slides MOC3O07 [4.645 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGF015

Drivers and Software for MicroTCA.4

725

M. Killenberg, M. Heuer, M. Hierholzer, L.P. Petrosyan, Ch. Schmidt, N. Shehzad, G. Varghese, M. Viti
DESY, Hamburg, Germany
T. Kozak, P. Prędki, J. Wychowaniak
TUL-DMCS, Łódź, Poland
S. Marsching
Aquenos GmbH, Baden-Baden, Germany
M. Mehle, T. Sušnik, K. Žagar
Cosylab, Ljubljana, Slovenia
A. Piotrowski
FastLogic Sp. z o.o., Łódź, Poland

Funding: This work is supported by the Helmholtz Validation Fund HVF-0016 'MTCA.4 for Industry'.
The MicroTCA.4 crate standard provides a powerful electronic platform for digital and analogue signal processing. Besides excellent hardware modularity, it is the software reliability and flexibility as well as the easy integration into existing software infrastructures that will drive the widespread adoption of the new standard. The DESY MicroTCA.4 User Tool Kit (MTCA4U) comprises three main components: A Linux device driver, a C++ API for accessing the MicroTCA.4 devices and a control system interface layer. The main focus of the tool kit is flexibility to enable fast development. The universal, expandable PCI Express driver and a register mapping library allow out of the box operation of all MicroTCA.4 devices which are running firmware developed with the DESY board support package. The tool kit has recently been extended with features like command line tools and language bindings to Python and Matlab.

Poster WEPGF015 [0.540 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGF029

High Level Software Structure for the European XFEL LLRF System

757

Ch. Schmidt, V. Ayvazyan, J. Branlard, Ł. Butkowski, O. Hensler, M. Killenberg, M. Omet, S. Pfeiffer, K.P. Przygoda, H. Schlarb
DESY, Hamburg, Germany
W. Cichalewski, F. Makowski
TUL-DMCS, Łódź, Poland
A. Piotrowski
FastLogic Sp. z o.o., Łódź, Poland

The Low level RF system for the European XFEL is controlling the accelerating RF fields in order to meet the specifications of the electron bunch parameters. A hardware platform based on the MicroTCA.4 standard has been chosen, to realize a reliable, remotely maintainable and high performing integrated system. Fast data transfer and processing is done by field programmable gate arrays (FPGA) within the crate, controlled by a CPU via PCIe communication. In addition to the MTCA system, the LLRF comprises external supporting modules also requiring control and monitoring software. In this paper the LLRF system high level software used in E-XFEL is presented. It is implemented as a semi-distributed architecture of front end server instances in combination with direct FPGA communication using fast optical links. Miscellaneous server tasks have to be executed, e.g. fast data acquisition and distribution, adaptation algorithms and updating controller parameters. Furthermore the inter-server data communication and integration within the control system environment as well as the interface to other subsystems are described.

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)