ICALEPCS2015 - List of Authors (Cichalewski, W.)

Paper	Title	Page
MOPGF079	European XFEL Cavities Piezoelectric Tuners Control Range Optimization	266
	W. Cichalewski, A. Napieralski TUL-DMCS, Łódź, Poland J. Branlard, Ch. Schmidt DESY, Hamburg, Germany
	The piezo based control of the superconducting cavity tuning has been under the development over last years. Automated compensation of Lorentz force detuning of FLASH and European X-FEL resonators allowed to maintain cavities in resonance operation even for high acceleration gradients (in range of 30 MV/m). It should be emphasized that cavity resonance control consists of two independent subsystems. First of all the slow motor tuner based system can be used for slow, wide range mechanical tuning (range of hundreds of kHz). Additionally the piezo tuning system allows for fine, dynamic compensation in a range of ~1 kHz. In mentioned pulse mode experiments (like FLASH), the piezo regulation budget should be preserved for in-pulse detuning control. In order to maintain optimal cavity frequency adjustment capabilities slow motor tuners should automatically act on the static detuning component at the same time. This paper presents work concerning development, implementation and evaluation of automatic superconducting cavity frequency control towards piezo range optimization. FLASH and X-FEL dedicated cavities tuning control experiences are also summarized.
	Poster MOPGF079 [0.936 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGF029	High Level Software Structure for the European XFEL LLRF System	757
	Ch. Schmidt, V. Ayvazyan, J. Branlard, Ł. Butkowski, O. Hensler, M. Killenberg, M. Omet, S. Pfeiffer, K.P. Przygoda, H. Schlarb DESY, Hamburg, Germany W. Cichalewski, F. Makowski TUL-DMCS, Łódź, Poland A. Piotrowski FastLogic Sp. z o.o., Łódź, Poland
	The Low level RF system for the European XFEL is controlling the accelerating RF fields in order to meet the specifications of the electron bunch parameters. A hardware platform based on the MicroTCA.4 standard has been chosen, to realize a reliable, remotely maintainable and high performing integrated system. Fast data transfer and processing is done by field programmable gate arrays (FPGA) within the crate, controlled by a CPU via PCIe communication. In addition to the MTCA system, the LLRF comprises external supporting modules also requiring control and monitoring software. In this paper the LLRF system high level software used in E-XFEL is presented. It is implemented as a semi-distributed architecture of front end server instances in combination with direct FPGA communication using fast optical links. Miscellaneous server tasks have to be executed, e.g. fast data acquisition and distribution, adaptation algorithms and updating controller parameters. Furthermore the inter-server data communication and integration within the control system environment as well as the interface to other subsystems are described.
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

European XFEL Cavities Piezoelectric Tuners Control Range Optimization

266

W. Cichalewski, A. Napieralski
TUL-DMCS, Łódź, Poland
J. Branlard, Ch. Schmidt
DESY, Hamburg, Germany

The piezo based control of the superconducting cavity tuning has been under the development over last years. Automated compensation of Lorentz force detuning of FLASH and European X-FEL resonators allowed to maintain cavities in resonance operation even for high acceleration gradients (in range of 30 MV/m). It should be emphasized that cavity resonance control consists of two independent subsystems. First of all the slow motor tuner based system can be used for slow, wide range mechanical tuning (range of hundreds of kHz). Additionally the piezo tuning system allows for fine, dynamic compensation in a range of ~1 kHz. In mentioned pulse mode experiments (like FLASH), the piezo regulation budget should be preserved for in-pulse detuning control. In order to maintain optimal cavity frequency adjustment capabilities slow motor tuners should automatically act on the static detuning component at the same time. This paper presents work concerning development, implementation and evaluation of automatic superconducting cavity frequency control towards piezo range optimization. FLASH and X-FEL dedicated cavities tuning control experiences are also summarized.

Poster MOPGF079 [0.936 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGF029

High Level Software Structure for the European XFEL LLRF System

757

Ch. Schmidt, V. Ayvazyan, J. Branlard, Ł. Butkowski, O. Hensler, M. Killenberg, M. Omet, S. Pfeiffer, K.P. Przygoda, H. Schlarb
DESY, Hamburg, Germany
W. Cichalewski, F. Makowski
TUL-DMCS, Łódź, Poland
A. Piotrowski
FastLogic Sp. z o.o., Łódź, Poland

The Low level RF system for the European XFEL is controlling the accelerating RF fields in order to meet the specifications of the electron bunch parameters. A hardware platform based on the MicroTCA.4 standard has been chosen, to realize a reliable, remotely maintainable and high performing integrated system. Fast data transfer and processing is done by field programmable gate arrays (FPGA) within the crate, controlled by a CPU via PCIe communication. In addition to the MTCA system, the LLRF comprises external supporting modules also requiring control and monitoring software. In this paper the LLRF system high level software used in E-XFEL is presented. It is implemented as a semi-distributed architecture of front end server instances in combination with direct FPGA communication using fast optical links. Miscellaneous server tasks have to be executed, e.g. fast data acquisition and distribution, adaptation algorithms and updating controller parameters. Furthermore the inter-server data communication and integration within the control system environment as well as the interface to other subsystems are described.

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)