ICALEPCS2015 - List of Authors (Baldini, V.)

Paper	Title	Page
MOPGF163	Status of the Local Monitor and Control System of SKA Dishes	472
	S. Riggi, U. Becciani, A. Costa, A. Ingallinera, F. Schillirò, C. Trigilio INAF-OACT, Catania, Italy V. Baldini, R. Cirami, A. Marassi INAF-OAT, Trieste, Italy G. Nicotra, C. Nocita INAF IRA, Bologna, Italy
	The Square Kilometer Array (SKA) project aims at building the world's largest radio observatory to observe the radio sky with unprecedented sensitivity and collecting area. In the SKA1 phase of the project, two dish arrays are to be built, one in South Africa (SKA1-Mid) and the other in Western Australia (SKA1-Survey). Each antenna will be provided with a local monitor and control system, enabling remote operations to engineers and to the Telescope Manager system. In this paper we present the current status of the software system being designed to monitor and control the dish subsystem. An overview of the dish instrumentation is reported, along with details concerning the software architecture, functional interfaces, prototyping and the evaluated technologies.
	Poster MOPGF163 [1.181 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGF001	The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT	689
	V. Baldini, G. Calderone, R. Cirami, I. Coretti, S. Cristiani, P. Di Marcantonio, P. Santin INAF-OAT, Trieste, Italy D. Mégevand Université de Genève, Observatoire Astronomique, Versoix, Switzerland F. Zerbi INAF-Osservatorio Astronomico di Brera, Merate, Italy
	ESPRESSO, the Echelle SPectrograph for Rocky Exoplanet and Stable Spectroscopic Observations, is a super-stable Optical High Resolution Spectrograph for the Combined Coudé focus of the VLT. It can be operated either as a single telescope instrument or as a multi-telescope facility, by collecting the light of up to four UTs. From the Nasmyth focus of each UT the light is fed, through a set of optical elements (Coudé Train), to the Front End Unit which performs several functions, as image and pupil stabilization, inclusion of calibration light and refocusing. The light is then conveyed into the spectrograph fibers. The whole process is handled by several electronically controlled devices. About 40 motorized stages, more than 90 sensors and several calibration lamps are controlled by the Instrument Control Electronics (ICE) and Software (ICS). The technology employed for the control of the ESPRESSO subsystems is PLC-based, with a distributed layout close to the functions to control. This paper illustrates the current status of the ESPRESSO ICE, showing the control architecture, the electrical cabinets organization and the experiences gained during the development and assembly phase.
	Poster WEPGF001 [5.729 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of the Local Monitor and Control System of SKA Dishes

472

S. Riggi, U. Becciani, A. Costa, A. Ingallinera, F. Schillirò, C. Trigilio
INAF-OACT, Catania, Italy
V. Baldini, R. Cirami, A. Marassi
INAF-OAT, Trieste, Italy
G. Nicotra, C. Nocita
INAF IRA, Bologna, Italy

The Square Kilometer Array (SKA) project aims at building the world's largest radio observatory to observe the radio sky with unprecedented sensitivity and collecting area. In the SKA1 phase of the project, two dish arrays are to be built, one in South Africa (SKA1-Mid) and the other in Western Australia (SKA1-Survey). Each antenna will be provided with a local monitor and control system, enabling remote operations to engineers and to the Telescope Manager system. In this paper we present the current status of the software system being designed to monitor and control the dish subsystem. An overview of the dish instrumentation is reported, along with details concerning the software architecture, functional interfaces, prototyping and the evaluated technologies.

Poster MOPGF163 [1.181 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGF001

The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT

689

V. Baldini, G. Calderone, R. Cirami, I. Coretti, S. Cristiani, P. Di Marcantonio, P. Santin
INAF-OAT, Trieste, Italy
D. Mégevand
Université de Genève, Observatoire Astronomique, Versoix, Switzerland
F. Zerbi
INAF-Osservatorio Astronomico di Brera, Merate, Italy

ESPRESSO, the Echelle SPectrograph for Rocky Exoplanet and Stable Spectroscopic Observations, is a super-stable Optical High Resolution Spectrograph for the Combined Coudé focus of the VLT. It can be operated either as a single telescope instrument or as a multi-telescope facility, by collecting the light of up to four UTs. From the Nasmyth focus of each UT the light is fed, through a set of optical elements (Coudé Train), to the Front End Unit which performs several functions, as image and pupil stabilization, inclusion of calibration light and refocusing. The light is then conveyed into the spectrograph fibers. The whole process is handled by several electronically controlled devices. About 40 motorized stages, more than 90 sensors and several calibration lamps are controlled by the Instrument Control Electronics (ICE) and Software (ICS). The technology employed for the control of the ESPRESSO subsystems is PLC-based, with a distributed layout close to the functions to control. This paper illustrates the current status of the ESPRESSO ICE, showing the control architecture, the electrical cabinets organization and the experiences gained during the development and assembly phase.

Poster WEPGF001 [5.729 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)