ICALEPCS2013 - List of Authors (Shirokov, A.V.)

Paper	Title	Page
THPPC050	Upgrade System of Vacuum Monitoring of Synchrotron Radiation Sources of National Research Centre Kurchatov Institute	1183
	N.I. Moseiko, V. Dombrovsky, Y.V. Efimov, V. Korchuganov, Y.V. Krylov, D.G. Odintsov NRC, Moscow, Russia L.A. Moseiko, A.V. Shirokov RRC, Moscow, Russia B.I. Semenov RRC KI, Moscow, Russia
	Modernization project of the vacuum system of the synchrotron radiation source at the National Research Centre Kurchatov Institute (NRC KI) has been designed and implemented. It includes transition to the new high-voltage power sources for NMD and PVIG–0.25/630 pumps. The system is controlled via CAN-bus, and the vacuum is controlled by measuring pump currents in a range of 0.0001–10 mA. Status visualization, data collection and data storage is implemented on Sitect SCADA 7.2 Server and SCADA Historian Server. The system ensures a vacuum of 10–7 Pa. The efficiency and reliability of the vacuum system is increased by this work, making it possible to improve the main parameters of the SR source.

Paper

Title

Page

Upgrade System of Vacuum Monitoring of Synchrotron Radiation Sources of National Research Centre Kurchatov Institute

1183

N.I. Moseiko, V. Dombrovsky, Y.V. Efimov, V. Korchuganov, Y.V. Krylov, D.G. Odintsov
NRC, Moscow, Russia
L.A. Moseiko, A.V. Shirokov
RRC, Moscow, Russia
B.I. Semenov
RRC KI, Moscow, Russia

Modernization project of the vacuum system of the synchrotron radiation source at the National Research Centre Kurchatov Institute (NRC KI) has been designed and implemented. It includes transition to the new high-voltage power sources for NMD and PVIG–0.25/630 pumps. The system is controlled via CAN-bus, and the vacuum is controlled by measuring pump currents in a range of 0.0001–10 mA. Status visualization, data collection and data storage is implemented on Sitect SCADA 7.2 Server and SCADA Historian Server. The system ensures a vacuum of 10–7 Pa. The efficiency and reliability of the vacuum system is increased by this work, making it possible to improve the main parameters of the SR source.