ICALEPCS2013 - List of Authors (Lee, D.)

Paper

Title

Page

Development Status of the TPS Control System

54

Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The EPICS was chosen as control system framework for the new project of 3 GeV synchrotron light source (Taiwan Photon Source, TPS). The standard hardware and software components had been defined, and the various IOCs (Input Output Controller) are gradually implemented as various subsystems control platforms. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. Development of the infrastructure of high level and low level software are on-going. Installation and integration test are in proceeding. Progress will be summarized in the paper.

Slides MOMIB02 [0.235 MB]

Poster MOMIB02 [5.072 MB]

MOPPC036

The BPM Integration in the Taiwan Photon Source

158

C.H. Kuo, Y.-T. Chang, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

TPS (Taiwan Photon Source) is a 3 GeV synchrotron light source which is being in construction at NSRRC. The TPS BPM is based on xTCA platform, is used for various request and function reasons. These functions will be discussed. Another purpose is for orbit feedback system. The tradition BPM electronic is separated from orbit feedback system, is just monitor. In the TPS, the orbit feedback system is embedded in the BPM crate with FPGA modules. High throughput backplane, data transfer and processing support rich function for waveform recorder, diagnostic, beam study and transient analysis. The implementation result of the BPM system will be reported in this conference.

Paper	Title	Page
MOMIB02	Development Status of the TPS Control System	54
	Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The EPICS was chosen as control system framework for the new project of 3 GeV synchrotron light source (Taiwan Photon Source, TPS). The standard hardware and software components had been defined, and the various IOCs (Input Output Controller) are gradually implemented as various subsystems control platforms. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. Development of the infrastructure of high level and low level software are on-going. Installation and integration test are in proceeding. Progress will be summarized in the paper.
	Slides MOMIB02 [0.235 MB]
	Poster MOMIB02 [5.072 MB]

MOPPC036	The BPM Integration in the Taiwan Photon Source	158
	C.H. Kuo, Y.-T. Chang, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	TPS (Taiwan Photon Source) is a 3 GeV synchrotron light source which is being in construction at NSRRC. The TPS BPM is based on xTCA platform, is used for various request and function reasons. These functions will be discussed. Another purpose is for orbit feedback system. The tradition BPM electronic is separated from orbit feedback system, is just monitor. In the TPS, the orbit feedback system is embedded in the BPM crate with FPGA modules. High throughput backplane, data transfer and processing support rich function for waveform recorder, diagnostic, beam study and transient analysis. The implementation result of the BPM system will be reported in this conference.