IBIC2015 - List of Authors (Treyer, D.M.)

Paper	Title	Page
TUPB064	Status of The European XFEL Transverse Intra Bunch Train Feedback System	492
	B. Keil, R. Baldinger, R. Ditter, M. Gloor, W. Koprek, F. Marcellini, G. Marinkovic, M. Roggli, M. Rohrer, M. Stadler, D.M. Treyer PSI, Villigen PSI, Switzerland
	Funding: This work was partially funded by the Swiss State Secretariat for Education, Research and Innovation SERI The European XFEL (E-XFEL) will have a transverse intra bunch train feedback system (IBFB) that is capable of correcting the beam position of individual bunches in the ~650us long bunch train, with a minimal bunch spacing of 222ns. The IBFB measures the beam positions with high-resolution cavity BPMs, and corrects the position of each bunch via stripline kicker magnets driven by class AB solid-state RF power amplifiers. The production of the IBFB BPM pickups is finished, and a pre-series version of the low-latency BPM electronics, including firmware and software, has been successfully tested with beam. After successful production and tests of prototypes, the series production of IBFB kicker magnets and RF power amplifiers is in progress. The IBFB feedback electronics hardware development is mainly finished, while firmware and software development is still in progress. This report summarizes the latest design status and test results of the different IBFB system components.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Status of The European XFEL Transverse Intra Bunch Train Feedback System

492

B. Keil, R. Baldinger, R. Ditter, M. Gloor, W. Koprek, F. Marcellini, G. Marinkovic, M. Roggli, M. Rohrer, M. Stadler, D.M. Treyer
PSI, Villigen PSI, Switzerland

Funding: This work was partially funded by the Swiss State Secretariat for Education, Research and Innovation SERI
The European XFEL (E-XFEL) will have a transverse intra bunch train feedback system (IBFB) that is capable of correcting the beam position of individual bunches in the ~650us long bunch train, with a minimal bunch spacing of 222ns. The IBFB measures the beam positions with high-resolution cavity BPMs, and corrects the position of each bunch via stripline kicker magnets driven by class AB solid-state RF power amplifiers. The production of the IBFB BPM pickups is finished, and a pre-series version of the low-latency BPM electronics, including firmware and software, has been successfully tested with beam. After successful production and tests of prototypes, the series production of IBFB kicker magnets and RF power amplifiers is in progress. The IBFB feedback electronics hardware development is mainly finished, while firmware and software development is still in progress. This report summarizes the latest design status and test results of the different IBFB system components.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)