IBIC2015 - List of Authors (Blaskovic Kraljevic, N.)

Paper	Title	Page
TUBLA04	Progress Towards Electron-Beam Feedback at the Nanometre Level at the Accelerator Test Facility (ATF2) at KEK	273
	P. Burrows, D.R. Bett, N. Blaskovic Kraljevic, T. Bromwich, G.B. Christian, M.R. Davis, C. Perry JAI, Oxford, United Kingdom
	Ultra-low latency beam-based digital feedbacks have been developed by the Feedback On Nanosecond Timescales (FONT) Group and tested at the Accelerator Test Facility (ATF2) at KEK in a programme aimed at beam stabilisation at the nanometre level at the ATF2 final focus. Three prototypes were tested: 1) A feedback system based on high-resolution stripline BPMs was used to stabilise the beam orbit in the beamline region c. 50m upstream of the final focus. 2) Information from this system was used in a feed-forward mode to stabilise the beam locally at the final focus. 3) A final-focus local feedback system utilising cavity BPMs was deployed. In all three cases the degree of beam stabilisation was observed in high-precision cavity BPMs at the ATF2 interaction point. Latest results are reported on stabilising the beam position to approximately 50nm.
	Slides TUBLA04 [6.936 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Progress Towards Electron-Beam Feedback at the Nanometre Level at the Accelerator Test Facility (ATF2) at KEK

273

P. Burrows, D.R. Bett, N. Blaskovic Kraljevic, T. Bromwich, G.B. Christian, M.R. Davis, C. Perry
JAI, Oxford, United Kingdom

Ultra-low latency beam-based digital feedbacks have been developed by the Feedback On Nanosecond Timescales (FONT) Group and tested at the Accelerator Test Facility (ATF2) at KEK in a programme aimed at beam stabilisation at the nanometre level at the ATF2 final focus. Three prototypes were tested: 1) A feedback system based on high-resolution stripline BPMs was used to stabilise the beam orbit in the beamline region c. 50m upstream of the final focus. 2) Information from this system was used in a feed-forward mode to stabilise the beam locally at the final focus. 3) A final-focus local feedback system utilising cavity BPMs was deployed. In all three cases the degree of beam stabilisation was observed in high-precision cavity BPMs at the ATF2 interaction point. Latest results are reported on stabilising the beam position to approximately 50nm.

Slides TUBLA04 [6.936 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)