SLAC, Menlo Park, California
The effect of the drive laser transverse shape upon the electron beam emittance and FEL performance at 1.5 angstroms was studied at 250 pC for the Linac Coherent Light Source X-Ray FEL. Rectangular grids and cylindrically symmetric shapes were imaged onto the cathode and the emittance and FEL output were measured. Each pattern was truncated by a 1.2 mm diameter iris. The projected and time-sliced emittances as well as the electron bunch shape were measured at 135 MeV using a one micron thick optical transition radiation foil and a transverse RF deflecting cavity. The beam was then compressed and accelerated to 13.7 GeV and transported through the undulator. In our initial measurements, the 1.5 angstrom FEL pulse energy was determined from the energy loss of the electron beam. Future experiments will use an x-ray calorimeter. The gain length was obtained by measuring the FEL output along the undulator by deflecting the electron beam off the optical axis. These emittances and the FEL performance are compared with the nominal uniform transverse shape.
