ECRIS2010 - List of Authors (Doleans, M.)

Paper

Title

Page

Intense Beam Production with SuSI

4

L.T. Sun, J. Brandon, D.G. Cole, M. Doleans, G. Machicoane, D. Morris, T. Ropponen, L. Tobos
NSCL, East Lansing, Michigan, USA
E. Pozdeyev
FRIB, East Lansing, Michigan, USA

SuSI ion source, a 3rd generation fully superconducting ECR ion source is now used for injection into the Coupled Cyclotron Facility since September 2009. Initial performances during the commissioning of SuSI were mainly limited by the microwave power available from a single 18 GHz microwave amplifier, especially for the production of heavier ion beams. The Injection of SuSI was modified to add a second 18 GHz amplifier, to reach a maximum of 3.0 kW of RF power inside the plasma chamber. Production of heavy ion beams, such as Kr¹⁴⁺, Bi³⁰⁺ and U³³⁺ is reported, to demonstrate the performance of SuSI. Additional studies were made with various ion source parameters to optimize the beam intensity within a normalized emittance of 0.9pi.mm.mrad as needed for the FRIB project and will be reported in this paper.

Slides MOCOAK02 [1.672 MB]

MOCOBK01

ECR Ion Sources for the Facility for Rare Isotope Beams (FRIB) Project at Michigan State University

14

G. Machicoane, M. Doleans, O.K. Kester, T. Ropponen, L.T. Sun, X. Wu
NSCL, East Lansing, Michigan, USA
D. Leitner
LBNL, Berkeley, California, USA
E. Pozdeyev, E. Tanke
FRIB, East Lansing, Michigan, USA

Funding: Work supported by US DOE Cooperative Agreement DE-SC0000661
Once operational, the Facility for Rare Isotope Beams (FRIB) will open the possibility to gain key understanding in nuclear science and in particular regarding the properties of nuclei far from the valley of stability or the nuclear processes in the universe. In addition it will also allow experimenters to test fundamental symmetries. The production of rare isotopes with FRIB will be achieved, using a heavy ion driver linac that will accelerate a stable isotope beam to 200 MeV/u and deliver it on a fragmentation target. FRIB aims to reach a primary beam power of 400 kW for light to heavy elements up to Uranium. To meet the intensity requirement two high performance ECR ion sources operating at 28 GHz will be used to produce high intensity of medium to high charge state ion beams. Plans regarding initial beam production with the ECR ion sources and beam transport through the front end will be discussed.

Slides MOCOBK01 [3.259 MB]

Paper	Title	Page
MOCOAK02	Intense Beam Production with SuSI	4
	L.T. Sun, J. Brandon, D.G. Cole, M. Doleans, G. Machicoane, D. Morris, T. Ropponen, L. Tobos NSCL, East Lansing, Michigan, USA E. Pozdeyev FRIB, East Lansing, Michigan, USA
	SuSI ion source, a 3rd generation fully superconducting ECR ion source is now used for injection into the Coupled Cyclotron Facility since September 2009. Initial performances during the commissioning of SuSI were mainly limited by the microwave power available from a single 18 GHz microwave amplifier, especially for the production of heavier ion beams. The Injection of SuSI was modified to add a second 18 GHz amplifier, to reach a maximum of 3.0 kW of RF power inside the plasma chamber. Production of heavy ion beams, such as Kr¹⁴⁺, Bi³⁰⁺ and U³³⁺ is reported, to demonstrate the performance of SuSI. Additional studies were made with various ion source parameters to optimize the beam intensity within a normalized emittance of 0.9pi.mm.mrad as needed for the FRIB project and will be reported in this paper.
	Slides MOCOAK02 [1.672 MB]

MOCOBK01	ECR Ion Sources for the Facility for Rare Isotope Beams (FRIB) Project at Michigan State University	14
	G. Machicoane, M. Doleans, O.K. Kester, T. Ropponen, L.T. Sun, X. Wu NSCL, East Lansing, Michigan, USA D. Leitner LBNL, Berkeley, California, USA E. Pozdeyev, E. Tanke FRIB, East Lansing, Michigan, USA
	Funding: Work supported by US DOE Cooperative Agreement DE-SC0000661 Once operational, the Facility for Rare Isotope Beams (FRIB) will open the possibility to gain key understanding in nuclear science and in particular regarding the properties of nuclei far from the valley of stability or the nuclear processes in the universe. In addition it will also allow experimenters to test fundamental symmetries. The production of rare isotopes with FRIB will be achieved, using a heavy ion driver linac that will accelerate a stable isotope beam to 200 MeV/u and deliver it on a fragmentation target. FRIB aims to reach a primary beam power of 400 kW for light to heavy elements up to Uranium. To meet the intensity requirement two high performance ECR ion sources operating at 28 GHz will be used to produce high intensity of medium to high charge state ion beams. Plans regarding initial beam production with the ECR ion sources and beam transport through the front end will be discussed.
	Slides MOCOBK01 [3.259 MB]