ECRIS2010 - List of Authors (Biarrotte, J.-L.)

Paper

Title

Page

First A/Q=3 Beams of Phoenix V2 on the Heavy Ions Low Energy Beam Transport Line of SPIRAL2

75

C. Peaucelle
IN2P3 IPNL, Villeurbanne, France
J. Angot, P. Grandemange, T. Lamy, T. Thuillier
LPSC, Grenoble Cedex, France
J.-L. Biarrotte
IPN, Orsay, France
D. Uriot
CEA/DSM/IRFU, France

The heavy ions low energy beam transport line (LEBT) of Spiral2 built at LPSC Grenoble is fully operational since the beginning of 2010. This LEBT has been calculated and designed to hold permanently 15 mA of multicharged ions extracted from the source at 60 kV. PHOENIX V2 ECRIS is presently installed on the LEBT and first tests started few months ago: A reliable beam of 1 mAe of O⁶⁺ beam at 45 kV has already been obtained for a long period with a very good transmission, and good reproducibility. Tests continue with an optimization of Ar¹²⁺ beam performance. The promising results of these first runs, particularly emittance measurements, profiles and optimization of charge optics will be presented along. The ECRIS Phoenix V2 and different equipments installed on this line (vacuum system, optic elements, diagnostics) will be described. The future program and planned improvements on the LEBT will be also discussed in this paper.

Slides TUCOAK01 [2.402 MB]

Paper	Title	Page
TUCOAK01	First A/Q=3 Beams of Phoenix V2 on the Heavy Ions Low Energy Beam Transport Line of SPIRAL2	75
	C. Peaucelle IN2P3 IPNL, Villeurbanne, France J. Angot, P. Grandemange, T. Lamy, T. Thuillier LPSC, Grenoble Cedex, France J.-L. Biarrotte IPN, Orsay, France D. Uriot CEA/DSM/IRFU, France
	The heavy ions low energy beam transport line (LEBT) of Spiral2 built at LPSC Grenoble is fully operational since the beginning of 2010. This LEBT has been calculated and designed to hold permanently 15 mA of multicharged ions extracted from the source at 60 kV. PHOENIX V2 ECRIS is presently installed on the LEBT and first tests started few months ago: A reliable beam of 1 mAe of O⁶⁺ beam at 45 kV has already been obtained for a long period with a very good transmission, and good reproducibility. Tests continue with an optimization of Ar¹²⁺ beam performance. The promising results of these first runs, particularly emittance measurements, profiles and optimization of charge optics will be presented along. The ECRIS Phoenix V2 and different equipments installed on this line (vacuum system, optic elements, diagnostics) will be described. The future program and planned improvements on the LEBT will be also discussed in this paper.
	Slides TUCOAK01 [2.402 MB]