DIPAC2011 - List of Authors (Sato, S.)

Paper	Title	Page
MOPD08	Beam Diagnostics in the J-PARC Linac for ACS Upgrade	50
	A. Miura, S. Sato JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan Z. Igarashi, M. Ikegami, T. Miyao, T. Toyama KEK, Ibaraki, Japan T. Tomisawa JAEA/LINAC, Ibaraki-ken, Japan
	J-PARC had developed the beam diagnostic devices for the current J-PARC linac and has used them since the operation start. J-PARC linac began the energy upgrade project since 2009 and 21 ACS cavities will be installed. In this project, many cavities and related devices are newly installed in the ACS section and its downstream part. Because the beam parameters are updated, new beam diagnostic devices are fabricated and current diagnostic devices are developed. Beam position monitors (BPM) are newly designed and fabricated, based on the computer simulation and bench test. Because the gas proportional BLMs as the current BLM are sensitive to background noise of X-ray emitted from RF cavities, it is difficult to recognize real beam loss. We need to subtract an X-ray noise from the signal from BLM, another candidate BLMs have been tried to measure the beam loss. In addition, the bunch shape monitor for the longitudinal tuning has been developed in the corroboration with the institute for nuclear research, Russia. In this paper, we describe the new developed devices and their development process, especially for beam loss monitor and the developing bunch shape monitor.

Paper

Title

Page

Beam Diagnostics in the J-PARC Linac for ACS Upgrade

50

A. Miura, S. Sato
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
Z. Igarashi, M. Ikegami, T. Miyao, T. Toyama
KEK, Ibaraki, Japan
T. Tomisawa
JAEA/LINAC, Ibaraki-ken, Japan

J-PARC had developed the beam diagnostic devices for the current J-PARC linac and has used them since the operation start. J-PARC linac began the energy upgrade project since 2009 and 21 ACS cavities will be installed. In this project, many cavities and related devices are newly installed in the ACS section and its downstream part. Because the beam parameters are updated, new beam diagnostic devices are fabricated and current diagnostic devices are developed. Beam position monitors (BPM) are newly designed and fabricated, based on the computer simulation and bench test. Because the gas proportional BLMs as the current BLM are sensitive to background noise of X-ray emitted from RF cavities, it is difficult to recognize real beam loss. We need to subtract an X-ray noise from the signal from BLM, another candidate BLMs have been tried to measure the beam loss. In addition, the bunch shape monitor for the longitudinal tuning has been developed in the corroboration with the institute for nuclear research, Russia. In this paper, we describe the new developed devices and their development process, especially for beam loss monitor and the developing bunch shape monitor.