TUL-DMCS, Łódź, Poland
DESY, Hamburg, Germany
The measurement and control of the electron bunch length is one of the key diagnostics in linac-based free-electron lasers to reach the required peak current in the electron bunches. In order to use the multi-channel signals from longitudinal bunch shape measurements for intra train feedback for the European XFEL, line readout rates in the MHz range and low latencies are required, which is far more than commercial multichannel radiation detectors (line cameras) can provide. The paper presents a 256 channel detector that allows analyzing optical or infrared radiation with 1 MHz rate and a few microseconds latency using photodiode arrays, as needed for synchrotron light monitors, electro-optical bunch length measurements, or other laser based diagnostics. The proposed architecture aims at high frequency readout with low latency by using a multichannel electronic front-end designed for HEP, combined with Si or InGaAs detector arrays with very fast response time, and a low-latency data acquisition system. Currently the device is at the conceptual design stage.
DESY, Hamburg, Germany
Stockholm University, Stockholm, Sweden
Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
TUL-DMCS, Łódź, Poland
Almost all accelerator-related diagnostic and steering systems require front-end electronic hardware and software for digitizing, synchronization, processing, controlling, and providing access to the control system. Increasingly high demands on resolution, bandwidth, stability, redundancy, low latency, real-time processing and distribution create the need for new technologies in order to fulfill those demands. For this reason, at the European XFEL and FLASH, the new, μTCA industry standard will be deployed. Over the last few years, significant achievements have been made in μTCA developments in collaboration with other research institutes and industry. In this paper, we give an overview of the required components of a typical μTCA system for diagnostics applications. The FLASH bunch arrival-time monitor will be used as an example.
