COOL2013 - List of Authors (Fedotov, M.G.)

Paper

Title

Page

Commissioning COSY Cooler with Electron Beam at Novosibirsk

79

V.B. Reva, N. Alinovskiy, T.V. Bedareva, E.A. Bekhtenev, O.V. Belikov, V.N. Bocharov, V.V. Borodich, M.I. Bryzgunov, A.V. Bubley, V.A. Chekavinskiy, V.G. Cheskidov, B.A. Dovzhenko, A.I. Erokhin, M.G. Fedotov, A.D. Goncharov, K. Gorchakov, V.K. Gosteev, I.A. Gusev, A.A. Ivanov, G.V. Karpov, Y.I. Koisin, M.N. Kondaurov, V.R. Kozak, A.M. Kruchkov, A.D. Lisitsyn, I.A. Lopatkin, V.R. Mamkin, A.S. Medvedko, V.M. Panasyuk, V.V. Parkhomchuk, I.V. Poletaev, V.A. Polukhin, A.Yu. Protopopov, D.N. Pureskin, A.A. Putmakov, P.A. Selivanov, E.P. Semenov, D.V. Senkov, D.N. Skorobogatov, N.P. Zapiatkin
BINP SB RAS, Novosibirsk, Russia

The electron cooler of a 2 MEV for COSY storage ring FZJ is assembled in BINP. Results of experiments with high voltage, with electron beam, cascade transformer for distribution power along acceleration tube will be discussed in this report. The COSY cooler is designed on the classic scheme of low energy coolers like cooler CSRm, CSRe, LEIR that was produced in BINP before. The electron beam is transported inside the longitudinal magnetic field along whole trajectory from an electron gun to a collector. This optic scheme is stimulated by the wide range of the working energies 0.025–2 MeV. The electrostatic accelerator consists of 33 individual unify section. Each section contains two HV power supply (±30 kV) and power supply of the magnetic coils. The electrical power to each section is provided by the cascade transformer. The cascade transformer is the set of the transformers connected in series with isolating winding.

Slides TUPM2HA01 [3.228 MB]

WEPPO12

Compass for Measuring the Magnetic Lines Straightness at the Cooling Section in Vacuum

121

A.V. Bubley, M.I. Bryzgunov, V.G. Cheskidov, M.G. Fedotov, V.K. Gosteev, O.I. Meshkov, V.M. Panasyuk, V.V. Parkhomchuk, V.B. Reva
BINP SB RAS, Novosibirsk, Russia
V. Kamerdzhiev, G. Langenberg
FZJ, Jülich, Germany

The 2 MeV cooler is under construction at COSY synchrotron. Due to high energy it is very strict requirement for the magnetic field homogeneity at the cooling solenoid. Since the magnetic field has to be adjusted during the accelerator operation, the measurement system is installed inside vacuum chamber. The design and features of this system are described in the article, as well as preliminary results are discussed.

Paper	Title	Page
TUPM2HA01	Commissioning COSY Cooler with Electron Beam at Novosibirsk	79
	V.B. Reva, N. Alinovskiy, T.V. Bedareva, E.A. Bekhtenev, O.V. Belikov, V.N. Bocharov, V.V. Borodich, M.I. Bryzgunov, A.V. Bubley, V.A. Chekavinskiy, V.G. Cheskidov, B.A. Dovzhenko, A.I. Erokhin, M.G. Fedotov, A.D. Goncharov, K. Gorchakov, V.K. Gosteev, I.A. Gusev, A.A. Ivanov, G.V. Karpov, Y.I. Koisin, M.N. Kondaurov, V.R. Kozak, A.M. Kruchkov, A.D. Lisitsyn, I.A. Lopatkin, V.R. Mamkin, A.S. Medvedko, V.M. Panasyuk, V.V. Parkhomchuk, I.V. Poletaev, V.A. Polukhin, A.Yu. Protopopov, D.N. Pureskin, A.A. Putmakov, P.A. Selivanov, E.P. Semenov, D.V. Senkov, D.N. Skorobogatov, N.P. Zapiatkin BINP SB RAS, Novosibirsk, Russia
	The electron cooler of a 2 MEV for COSY storage ring FZJ is assembled in BINP. Results of experiments with high voltage, with electron beam, cascade transformer for distribution power along acceleration tube will be discussed in this report. The COSY cooler is designed on the classic scheme of low energy coolers like cooler CSRm, CSRe, LEIR that was produced in BINP before. The electron beam is transported inside the longitudinal magnetic field along whole trajectory from an electron gun to a collector. This optic scheme is stimulated by the wide range of the working energies 0.025–2 MeV. The electrostatic accelerator consists of 33 individual unify section. Each section contains two HV power supply (±30 kV) and power supply of the magnetic coils. The electrical power to each section is provided by the cascade transformer. The cascade transformer is the set of the transformers connected in series with isolating winding.
	Slides TUPM2HA01 [3.228 MB]

WEPPO12	Compass for Measuring the Magnetic Lines Straightness at the Cooling Section in Vacuum	121
	A.V. Bubley, M.I. Bryzgunov, V.G. Cheskidov, M.G. Fedotov, V.K. Gosteev, O.I. Meshkov, V.M. Panasyuk, V.V. Parkhomchuk, V.B. Reva BINP SB RAS, Novosibirsk, Russia V. Kamerdzhiev, G. Langenberg FZJ, Jülich, Germany
	The 2 MeV cooler is under construction at COSY synchrotron. Due to high energy it is very strict requirement for the magnetic field homogeneity at the cooling solenoid. Since the magnetic field has to be adjusted during the accelerator operation, the measurement system is installed inside vacuum chamber. The design and features of this system are described in the article, as well as preliminary results are discussed.