| Paper |
Title |
Page |
| MOPC061 |
Progress in R&D Efforts on the Energy Recovery Linac in Japan
|
205 |
| |
- S. Sakanaka, T. A. Agoh, A. Enomoto, S. Fukuda, K. Furukawa, T. Furuya, K. Haga, K. Harada, S. Hiramatsu, T. Honda, Y. Honda, K. Hosoyama, M. Izawa, E. Kako, T. Kasuga, H. Kawata, M. Kikuchi, H. Kobayakawa, Y. Kobayashi, T. Matsumoto, S. Michizono, T. Mitsuhashi, T. Miura, T. Miyajima, T. Muto, S. Nagahashi, T. Naito, T. Nogami, S. Noguchi, T. Obina, S. Ohsawa, T. Ozaki, H. Sasaki, S. Sasaki, K. Satoh, M. Satoh, M. Shimada, T. Shioya, T. Shishido, T. Suwada, T. Takahashi, Y. Tanimoto, M. Tawada, M. Tobiyama, K. Tsuchiya, T. Uchiyama, K. Umemori, S. Yamamoto
KEK, Ibaraki
- R. Hajima, H. Iijima, N. Kikuzawa, E. J. Minehara, R. Nagai, N. Nishimori, M. Sawamura
JAEA/ERL, Ibaraki
- H. Hanaki
JASRI/SPring-8, Hyogo-ken
- A. Ishii, I. Ito, T. Kawasaki, H. Kudo, N. Nakamura, H. Sakai, S. Shibuya, K. Shinoe, T. Shiraga, H. Takaki
ISSP/SRL, Chiba
- M. Katoh
UVSOR, Okazaki
- Y. Kobayashi, K. Torizuka, D. Yoshitomi
AIST, Tsukuba
- M. Kuriki
HU/AdSM, Higashi-Hiroshima
|
|
| |
The future synchrotron light sources, based on the energy recovery linacs (ERL), are expected to be capable of producing super-brilliant and/or ultra-short pulses of synchrotron radiation. The ERL-based light sources are under development at such institutes as the Cornell University, the Daresbury Laboratory, the Advanced Photon Source, and KEK/JAEA. The Japanese collaboration team, including KEK, JAEA, ISSP, and UVSOR, is working to realize the key technologies for the ERLs. Our R&D program includes the developments of ultra-low-emittance photocathode DC guns and of superconducting cavities, as well as proofs of accelerator-physics issues at a small test ERL (the Compact ERL). A 250-kV, 50-mA photo-cathode DC gun is under construction at JAEA. Two single-cell niobium cavities have been tested under high electric fields at KEK. The conceptual design of the Compact ERL has been carried out. We report recent progress in our R&D efforts.
|
|
| TUPC113 |
Beam Energy Compensation by RF Amplitude Control for Thermionic RF Gun and Linac Based Mid-infrared FEL
|
1329 |
| |
- H. Zen, T. Kii, R. Kinjo, K. Masuda, H. Ohgaki, S. Sasaki, T. Shiiyama
Kyoto IAE, Kyoto
|
|
| |
Institute of Advanced Energy, Kyoto University has constructed a mid-infrared FEL facility which consists of a thermionic RF gun, a traveling-wave type accelerating tube and a halbach type undulator. The electron beam quality is critical for lasing FEL. However, we found that the beam energy after the accelerator tube decreased from 25 to 23.5 MeV (around 6%) during macro-pulse duration (~4μsec), because.the beam current increases from 65 to 120 mA during the macro-pulse due to the backbombardment effect in the RF gun. To compensate the energy drop and to minimize the energy spread over the macro-pulse, the amplitude of RF power fed to the tube was controlled. Since a precise micro-bunch interval required to build up the FEL, the RF phase was also controlled. As the result, the energy spread of the electron beam was greatly reduced from 6 to 0.8% in FWHM which was same with micro-pulse energy spread (~0.8%). The phase stability during macro-pulse was also improved from 10 to less than 2 degree.
|
|
| THPC070 |
Symmetry Restoration of the SPring-8 Storage Ring by Counter-sextupole Magnets
|
3149 |
| |
- K. Soutome, S. Daté, T. Fujita, K. Fukami, C. Mitsuda, A. Mochihashi, H. Ohkuma, M. Oishi, S. Sasaki, J. Schimizu, Y. Shimosaki, M. Shoji, M. Takao, K. Tsumaki, H. Yonehara, C. Zhang
JASRI/SPring-8, Hyogo-ken
- S. Matsui, H. Takebe, H. Tanaka
RIKEN/SPring-8, Hyogo
|
|
| |
In the SPring-8 storage ring there are four magnet-free long straight sections of about 30m. These were realized in 2000 by locally rearranging quadrupole and sextupole magnets. In modifying the optics we took care of the periodicity of cell structure, especially of sextupole field distribution along the ring. To keep the periodicity high and hence the dynamic aperture large, we adopted a scheme in which "betatron phase matching" and "local chromaticity correction" are combined. In this scheme the dynamic aperture for on-momentum electrons is kept by the phase matching and that for off-momentum electrons is enlarged by the local chromaticity correction with weak sextupoles (SL). After modifying the lattice, we tried to recover the symmetry of the ring further and found that a harmful effect of nonlinear kick due to SL can be minimized by additional "counter-sextupole magnets" placed 180 degrees apart in horizontal betatron phase from SL. We installed such counter-sextupoles in every long straight sections and confirmed that the aperture was improved. In the paper we discuss these topics showing experimental data of injection efficiency, momentum acceptance, etc.
|
|
| THPC127 |
Filling of High Current Singlet and Train of Low Bunch Current in SPring-8 Storage Ring
|
3284 |
| |
- T. Nakamura, T. Fujita, K. Fukami, K. Kobayashi, C. Mitsuda, M. Oishi, S. Sasaki, M. Shoji, K. Soutome, M. Takao, Y. Taniuchi
JASRI/SPring-8, Hyogo-ken
- T. Ohshima
RIKEN/SPring-8, Hyogo
- Z. R. Zhou
USTC/NSRL, Hefei, Anhui
|
|
| |
We performed the storage of high current singlet of 10mA/bunch and a train of bunches of 0.3mA/bunch under the bunch by bunch feedback systems with newly developed bunch current sensitive automatic attenuators with FPGA. The automatic attenuator reduces the signal level of the high current bunch by factor three to five to avoid the saturation of the feedback systems. With this system, the feedback systems suppress horizontal and vertical mode-coupling instabilities and raise the bunch current limit from 3.5mA/bunch to 12mA/bunch, and simultaneously the systems suppress the multi-bunch instabilities by resistive-wall and cavity higher order mode impedances. The improvement of the automatic attenuation system to fit to the final target of the bunch current in the train, 0.06mA/bunch, are being performed. The other problems which limit the filling patterns, such as saturation of the readout electronics of the beam position monitor system and the heating of vacuum components by high current bunches, will be briefly presented.
|
|