A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Ciani, G.

Paper Title Page
TUPC004 The Diagnostic Line of Elettra Booster 100MeV Pre-injector 1044
 
  • S. Bassanese, L. Badano, M. Bossi, A. Carniel, G. Ciani, S. Di Mitri, M. Ferianis, G. Mian, G. Penco, M. Veronese
    ELETTRA, Basovizza, Trieste
 
  In order to fully characterize the beam of the new 100MeV linac pre-injector for the Elettra Booster, a standard diagnostic set-up has been designed which includes strip line BPMs, scintillating screens and current transformers. During the initial tuning of the pre-injector, a thermo-ionic gun followed by a 500MHz pre bunching cavity, an S-band bunching structure and two LIL accelerating sections, some extra diagnostics have been used to get a deeper understanding of the pre-injector operating point. In particular some prototypes of the FERMI@elettra diagnostics, installed on the same booster pre-injector, have been used to better characterize the beam transverse and longitudinal beam axis. An improved resolution screen system, equipped with a YAG screen, has been used as well as a wideband longitudinal pick-up. The measurement results as well as the tuning procedure are here presented.  
TUPC079 Beam Emittance Measurement for the New Full Energy Injector at ELETTRA 1236
 
  • G. Penco, L. Badano, S. Bassanese, G. Ciani, P. Craievich, S. Di Mitri, M. Ferianis, M. Predonzani, M. Veronese
    ELETTRA, Basovizza, Trieste
  • A. A. Lutman
    DEEI, Trieste
 
  An emittance measurement station was set up and operated with the quadrupole scan technique to characterize the electron beam transverse phase space at the Elettra laboratory. The diagnostic station, based on a YAG:Ce scintillation screen imaged by a CCD digital camera, was installed at the end of the 100 MeV booster pre-injector together with a beam longitudinal structure monitor. This equipment plays an important role for the bunching system optimization and for the optical matching of the injection transfer line to the booster ring. Experimental results and comparison with multi-particle tracking codes simulation are presented in this paper.