| Paper |
Title |
Page |
| MOPKF030 |
"ARC-EN-CIEL" a Proposal for a 4th Generation Light Source in France
|
366 |
| |
- M.-E. Couprie, D. Garzella, B. Gilquin, P. Monot, L. Nahon
CEA/DSM, Gif-sur-Yvette
- O.V. Chubar, A. Loulergue
SOLEIL, Gif-sur-Yvette
- M. Desmons, M. Jablonka, F. Meot, A. Mosnier
CEA/DSM/DAPNIA, Gif-sur-Yvette
- J.-R. Marquès
LULI, Palaiseaux
- J.-M. Ortega
LURE, Orsay
- A. Rousse
LOA, Palaiseau
|
|
| |
An accelerator based 4th generation source is proposed to provide the user community with coherent femtosecond light pulses in the UV to X ray range. The project is based on a CW 700 MeV superconducting linac delivering high charge, subpicosecond, low emittance electron bunches with high repetition rate. This facility allows for testing High Gain Harmonic Generation seeded with high harmonics in gases, as well as the standard SASE mode, covering a spectral range down to 0.8 nm and 5 nm respectively. In addition, two beam loops are foreseen to increase the beam current in using the energy recovery technique. They will accommodate undulators for the production of femtosecond synchrotron radiation in the IR, VUV and X ray ranges together with a FEL oscillator in the 10 nm range.
|
|
| WEPLT079 |
Non Linear Beam Dynamics and Lifetime on the SOLEIL Storage Ring
|
2032 |
| |
- P. Brunelle, A. Loulergue, A. Nadji, L.S. Nadolski
SOLEIL, Gif-sur-Yvette
|
|
| |
The incidence of several non-linear effects on the energy acceptance and beam lifetime has been investigated, using the BETA and TRACY II tracking codes. The effect of all magnets multipolar components has been checked on the working point (18.20; 10.30), especially the decapolar component induced by the H-corrector. The dipolar field, which is created by additional coils in the sextupoles, generates a significant decapolar component which, associated to the distributed dispersion, can reduce significantly the dynamic acceptance at large energy deviations. This effect depends on the natural closed orbit to be corrected: corrector strengths and cross talk between the different decapolar components. Moreover, the sensitivity to the number of correctors, used for correction, has been evaluated. The effect of insertions devices has also been studied, integrating field maps generated by the RADIA code into the tracking codes. With undulators, such as an in-vacuum U20 and an Apple II type HU80 (with different polarization modes), it was shown that the transverse field in-homogeneity and the focusing effects generating beta-beat can affect severely the energy acceptance and the beam lifetime because of resonance excitation.
|
|
| THPKF029 |
Femto-second Electron Beam Slicing Project at SOLEIL
|
2329 |
| |
- O.V. Chubar, M. Idir, M.-P. Level, A. Loulergue, T. Moreno, A. Nadji, L.S. Nadolski, F. Polack
SOLEIL, Gif-sur-Yvette
|
|
| |
The goal of the slicing project at SOLEIL is to provide short (50-100 fs) soft and hard X-rays pulses. The principle is based on the technique demonstrated earlier at ALS. In our case, the naturally suitable phase advances and the horizontal distributed dispersion enable the sliced pulse to be used on several consecutive straight sections. Further separation between the core and the sliced electron beams is obtained by increasing the effective horizontal dispersion using a chicane bracketing the modulator. In the hard X-rays case, the photon beams are separated spatially using a simple slit in a pinhole-camera type configuration while a mixed spatial-angular separation is chosen for the soft X-rays case. This minimizes the amount of parasitic core radiation scattered from the surface of the first focusing mirror. We will first describe the proposed scheme, the impact on the machine and some other issues. Then, photon optics calculation is presented. This takes into account the SOLEIL magnet lattice, realistic parameters of a femto-second laser, peculiarities of spectral distributions of undulator radiation and its diffraction in the range of intensities covering several orders of magnitude.
|
|