| Paper |
Title |
Page |
| MOPLT144 |
Design for a 1036 Super-B-factory at PEP-II
|
878 |
| |
- J. Seeman, Y. Cai, F.-J. Decker, S. Ecklund, A.S. Fisher, J.D. Fox, S.A. Heifets, A. Novokhatski, M.K. Sullivan, D. Teytelman, U. Wienands
SLAC, Menlo Park, California
|
|
| |
Design studies are underway to arrive at a complete parameter set for a very high luminosity e+e- Super B-Factory (SBF) in the luminosity range approaching 1036/cm2/s. The design is based on a collider in the PEP-II tunnel but with an upgraded RF system (higher frequency), magnets, vacuum system, and interaction region. The accelerator physics issues associated with this design are reviewed as well as the site and power constraints. Near term future studies will be discussed.
|
|
| THPLT160 |
Measurements of Transverse Coupled-bunch Instabilities in PEP-II
|
2831 |
| |
- D. Teytelman, R. Akre, J.D. Fox, S.A. Heifets, A. Krasnykh, D. Van Winkle, U. Wienands
SLAC, Menlo Park, California
|
|
| |
At the design currents the PEP-II High and Low Energy Rings operate above the coupled-bunch instability thresholds in horizontal and vertical planes. Both machines have used analog bunch-by-bunch feedback systems to stabilize the beams since commissioning. Here we present a measurement technique that uses the capabilities of the PEP-II programmable digital longitudinal feedback system to provide transient diagnostics in X or Y directions. This technique allows one to measure instability growth or damping rates as well as oscillation frequencies in both open-loop and closed-loop conditions. Based on these measurements the configuration of the relevant transverse feedback channel can be optimized. The technique will be illustrated with instability measurements and feedback optimization examples. Comparisons of the measured modal patterns and growth rates to the theoretical predictions will be presented.
|
|
| MOPLT143 |
Results and Plans of the PEP-II B-Factory
|
875 |
| |
- J. Seeman, J. Browne, Y. Cai, S. Colocho, F.-J. Decker, M.H. Donald, S. Ecklund, R.A. Erickson, A.S. Fisher, J.D. Fox, S.A. Heifets, R.H. Iverson, A. Kulikov, A. Novokhatski, M.T.F. Pivi, M.C. Ross, P. Schuh, T.J. Smith, K. Sonnad, M. Stanek, M.K. Sullivan, P. Tenenbaum, D. Teytelman, J.L. Turner, D. Van Winkle, U. Wienands, M. Woodley, Y.T. Yan, G. Yocky
SLAC, Menlo Park, California
- M.E. Biagini
INFN/LNF, Frascati (Roma)
- J.N. Corlett, C. Steier, A. Wolski, M.S. Zisman
LBNL, Berkeley, California
- W. Kozanecki
CEA/DSM/DAPNIA, Gif-sur-Yvette
- G. Wormser
IPN, Orsay
|
|
| |
PEP-II is an e+e- B-Factory Collider located at SLAC operating at the Upsilon 4S resonance. PEP-II has delivered, over the past four years, an integrated luminosity to the BaBar detector of over 175 fb-1 and has reached a luminosity over 7.4x1033/cm2/s. Steady progress is being made in reaching higher luminosity. The goal over the next few years is to reach a luminosity of at least 2x1034/cm2/s. The accelerator physics issues being addressed in PEP-II to reach this goal include the electron cloud instability, beam-beam effects, parasitic beam-beam effects, trickle injection, high RF beam loading, lower beta y*, interaction region operation, and coupling control.
|
|