| Paper |
Title |
Page |
| WEPLT075 |
Status Report on the Beam Dynamics Developments for the SPIRAL 2 Project
|
2020 |
| |
- R. Duperrier, D. Uriot
CEA/DSM/DAPNIA, Gif-sur-Yvette
- P. Bertrand, F. Varenne
GANIL, Caen
- J.-L. Biarrotte
IPN, Orsay
- J.-M. De Conto
ISN, Grenoble
- E. Froidefond
LPSC, Grenoble
- N. Pichoff
CEA/DAM, Bruyères-le-Châtel
|
|
| |
The driver for the SPIRAL 2 project aims to accelerate a 5 mA D+ beam up to 20 A.MeV and a 1 mA beam for Q/A=1/3 up to 14.5 A.MeV. It operates in a continuous wave regime (cw), is designed for a maximum efficiency in the transmission of intense beams. Recent studies have led to change the reference design. The current design consists in an injector (ECR sources + LEBTs with the possibility to inject from several sources + a Radio Frequency Quadrupole) followed by a superconducting section based on an array of independently phased cavities where the transverse focalisation is performed by warm quadrupoles. This paper presents the beam dynamics studies associated to these new choices, the HEBT design and the fast chopping in the MEBT.
|
|
| WEPLT078 |
The IFMIF High Energy Beam Transport Line
|
2029 |
| |
- D. Uriot, R. Duperrier, J. Payet
CEA/DSM/DAPNIA, Gif-sur-Yvette
|
|
| |
The IFMIF project (International Fusion Materials Irradiation Facility) requests two linacs designed to accelerate 125 mA deuteron beams up to 40 MeV. The linac has to work in CW mode and uses one RFQ and 10 DTL tanks. After extraction and transport, the deuteron beams with strong internal space charge forces have to be bunched, accelerated and transported to target for the production of high neutron flux. This paper presents the high energy beam transport line which provides a flat rectangular beam profile on the liquid lithium target. Transverse uniformisation is obtained by using non-linear mutipole lenses (octupoles and duodecapoles). Beam dynamics with and without errors has been study.
|
|