| Paper |
Title |
Page |
| MOPKF031 |
SOLEIL Insertion Devices: The Progress Report
|
369 |
| |
- O.V. Chubar, C. Benabderrahmane, A. Dael, M.-P. Level, O. Marcouillé, M. Massal
SOLEIL, Gif-sur-Yvette
|
|
| |
The French national synchrotron radiation source SOLEIL is planned to start operation in 2006 with several different insertion devices installed in the storage ring either from "day one" or within the first year. The list of high-priority insertion devices includes: 3 planar hybrid in-vacuum undulators with the period of 20 mm; 3 Apple-II type PPM undulators with the period of 80 mm; 3 electromagnet elliptical undulators with the period of 256 mm, and a 640 mm period elliptical electromagnet undulator offering advanced possibilities for fine-tuning of polarization states of the emitted radiation. The emission of all these undulators is covering wide spectral range extending from hard X-rays to UV. Pre-design of the IDs was done by SOLEIL. The construction will be done by industrial companies and institutions with production capabilities. Magnetic assembly of the Apple-II and in-vacuum undulators is planned to be done in collaboration with ELETTRA and ESRF. The final magnetic measurements of all the IDs will be made in the SOLEIL magnetic measurements laboratory. The paper will present peculiarities of the magnetic design, calculated maximum-flux spectra and associated heat load in various modes of operation.
|
|
| WEPKF033 |
Application of Finite Volume Integral Approach to Computing of 3D Magnetic Fields Created by Distributed Iron-dominated Electromagnet Structures
|
1675 |
| |
- O.V. Chubar, C. Benabderrahmane, O. Marcouillé, F. Marteau
SOLEIL, Gif-sur-Yvette
- J. Chavanne, P. Elleaume
ESRF, Grenoble
|
|
| |
Iron-dominated electromagnet structures are traditionally considered as a domain of applications of the Finite-Element Method (FEM). FEM computer codes provide high accuracy for "close circuit" type geometries, however they are much less efficient for distributed geometries consisting of many spatially separated magnets interacting with each other. Examples of such geometries related to particle accelerators are insertion devices, quadrupole and sextupole magnets located close to each other, magnets with combined functions. Application of the finite volume integral approach implemented in the Radia 3D magnetostatics code to solving such geometries is described. In this approach, space around individual magnets does not require any meshing. An adaptive segmentation of iron parts, with the segmenting planes being roughly perpendicular or parallel to the expected directions of magnetic flux lines, minimizes dramatically the necessary CPU and memory resources. If a geometry is, nevertheless, too big for its complete interaction matrix to fit into memory, a special scheme of relaxation "by parts" can be applied. The results of calculations made for the SOLEIL electromagnet undulator HU256 will be presented.
|
|