IPAC2014 - List of Authors (Xu, H.)

Paper	Title	Page
THPME143	Measuring Energy Spread Using Beam Screen Monitor and Four Strip-Line Electrodes for Hls II Injector*	3587
SUSPSNE076	use link to see paper's listing under its alternate paper code
	K. Tang, J. Liu, P. Lu, Q. Luo, B.G. Sun, H. Xu, J. Xu, Y.L. Yang, Z.R. Zhou, J.Y. Zou USTC/NSRL, Hefei, Anhui, People's Republic of China
	In order to nondestructively measure the beam energy spread with a beam energy of 0.8GeV in the injector at the upgrade project of Hefei Light Source (HLS II) in real time, a beam energy spread monitor (BESM) using beam position monitor (BPM) with four stripline electrodes has been developed. And a screen monitor (SM) near the BESM is used to measure beam energy spread destructively. This paper introduces in brief the beam position measurement system and beam transverse profile measurement system. The relationship between the transverse size at the BESM and at the SM (Flag3) is discussed in detail in this report. The result shows that energy spread measuring result of BESM and SM is 0.19% and 0.18% respectively. So we can draw a conclusion that the BESM is capable of nondestructively measuring the beam energy spread.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME143
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME144	Stripline Beam Position Monitor for THz Source Based FEL	3590
	J. Xu, L. Li, J. Liu, P. Lu, Y.J. Pei, B.G. Sun, K. Tang, J.G. Wang, F.F. Wu, H. Xu, Y.L. Yang, Z.R. Zhou, J.Y. Zou USTC/NSRL, Hefei, Anhui, People's Republic of China
	A 14MeV Linac with both the micro-pulse repetition rate 2856MHz and the macro-pulse width 6us for the THz Source Based FEL was proposed. In order to measure the beam position, a stripline beam position monitor (BPM) was designed, and a commercial BPM electronics Libera Brilliance Single Pass was adopted. As the input carrier frequency of the BPM electrode signal is 2856MHz, but the operating frequency of the Libera Brilliance Single Pass is 500MHz, so a front-end electronics was needed before the electrode signals feed into Libera Brilliance Single Pass. The front-end electronics was designed to make the BPM electrode signals of 2856MHz convert to 500MHz.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME144
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

THPME143

Measuring Energy Spread Using Beam Screen Monitor and Four Strip-Line Electrodes for Hls II Injector*

3587

SUSPSNE076

use link to see paper's listing under its alternate paper code

K. Tang, J. Liu, P. Lu, Q. Luo, B.G. Sun, H. Xu, J. Xu, Y.L. Yang, Z.R. Zhou, J.Y. Zou
USTC/NSRL, Hefei, Anhui, People's Republic of China

In order to nondestructively measure the beam energy spread with a beam energy of 0.8GeV in the injector at the upgrade project of Hefei Light Source (HLS II) in real time, a beam energy spread monitor (BESM) using beam position monitor (BPM) with four stripline electrodes has been developed. And a screen monitor (SM) near the BESM is used to measure beam energy spread destructively. This paper introduces in brief the beam position measurement system and beam transverse profile measurement system. The relationship between the transverse size at the BESM and at the SM (Flag3) is discussed in detail in this report. The result shows that energy spread measuring result of BESM and SM is 0.19% and 0.18% respectively. So we can draw a conclusion that the BESM is capable of nondestructively measuring the beam energy spread.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME143

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME144

Stripline Beam Position Monitor for THz Source Based FEL

3590

J. Xu, L. Li, J. Liu, P. Lu, Y.J. Pei, B.G. Sun, K. Tang, J.G. Wang, F.F. Wu, H. Xu, Y.L. Yang, Z.R. Zhou, J.Y. Zou
USTC/NSRL, Hefei, Anhui, People's Republic of China

A 14MeV Linac with both the micro-pulse repetition rate 2856MHz and the macro-pulse width 6us for the THz Source Based FEL was proposed. In order to measure the beam position, a stripline beam position monitor (BPM) was designed, and a commercial BPM electronics Libera Brilliance Single Pass was adopted. As the input carrier frequency of the BPM electrode signal is 2856MHz, but the operating frequency of the Libera Brilliance Single Pass is 500MHz, so a front-end electronics was needed before the electrode signals feed into Libera Brilliance Single Pass. The front-end electronics was designed to make the BPM electrode signals of 2856MHz convert to 500MHz.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME144

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)