IPAC2014 - List of Authors (Simpson, B.E.)

Paper	Title	Page
MOPME082	ILC-Class Marx Modulator at KEK	562
	M.P.J. Gaudreau, N. Silverman, B.E. Simpson Diversified Technologies, Inc., Bedford, Massachusetts, USA J.A. Casey Rockfield Research Inc., Las Vegas, Nevada, USA
	Funding: US Department of Energy, Award DE-FG02-05ER84352 KEK, High Energy Accelerator Research Organization In October 2013, Diversified Technologies, Inc. (DTI) successfully installed and began operation of a 120 kV, 120 A, 1.7 ms Marx modulator for the High Energy Accelerator Research Organization (KEK) in Japan. Originally conceived, and built under a DOE SBIR grant to support SLAC (completed in 2010), the Marx bank modulator demonstrates a new technology for compact and economic ILC-class performance; the design meets the performance requirements for ILC, does so in a more compact form factor than other known technologies, and, we believe, will be more economic than other technologies. The basic concept of a Marx modulator is that it charges an array of capacitors in parallel (low voltage), then erects them in series to form a high-voltage discharge. Using DTI’s solid-state switches (instead of traditional spark gaps or SCRs) to construct a Marx modulator enables it to open and close; thus the capacitors serve as storage capacitors rather than fully exhausting during each pulse. The opening capability of the DTI switches also provides for arc protection of the load, exactly as they would in a hard-switch. Such a system requires no crowbar protection to protect the load against arcs.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPME082
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPME021	Solid-state Pulsed Klystron Transmitters	2300
	K. Schrock, C. Chipman, M.P.J. Gaudreau, B.E. Simpson Diversified Technologies, Inc., Bedford, Massachusetts, USA
	Funding: Lawrence Berkeley National Laboratory Daresbury Laboratory Diversified Technologies, Inc. (DTI) is currently building and will deliver in early 2014 two solid-state pulsed klystron transmitters. Though not identical, the units are similar in design, and will be delivered to Lawrence Berkeley National Laboratory (LBNL) and Daresbury Laboratory in England. DTI’s goal across these two projects is to develop a complete package which can subsequently be marketed in the high peak power laboratory transmitter market. The modulator is a pulse transformer-coupled hybrid system, including ancillary klystron components (i.e., focus coil, socket) but not the actual klystron tube. Both systems employ a relatively simple modulator, consisting of an energy storage capacitor, a high voltage series switch, a step-up pulse transformer, and a passive pulse-flattening circuit. This arrangement gives an extremely flat pulse and allows the use of a moderate value of storage capacitor. The DTI switch can open or close as commanded, so the pulse width is adjusted by the gate pulse to the system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPME021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

ILC-Class Marx Modulator at KEK

562

M.P.J. Gaudreau, N. Silverman, B.E. Simpson
Diversified Technologies, Inc., Bedford, Massachusetts, USA
J.A. Casey
Rockfield Research Inc., Las Vegas, Nevada, USA

Funding: US Department of Energy, Award DE-FG02-05ER84352 KEK, High Energy Accelerator Research Organization
In October 2013, Diversified Technologies, Inc. (DTI) successfully installed and began operation of a 120 kV, 120 A, 1.7 ms Marx modulator for the High Energy Accelerator Research Organization (KEK) in Japan. Originally conceived, and built under a DOE SBIR grant to support SLAC (completed in 2010), the Marx bank modulator demonstrates a new technology for compact and economic ILC-class performance; the design meets the performance requirements for ILC, does so in a more compact form factor than other known technologies, and, we believe, will be more economic than other technologies. The basic concept of a Marx modulator is that it charges an array of capacitors in parallel (low voltage), then erects them in series to form a high-voltage discharge. Using DTI’s solid-state switches (instead of traditional spark gaps or SCRs) to construct a Marx modulator enables it to open and close; thus the capacitors serve as storage capacitors rather than fully exhausting during each pulse. The opening capability of the DTI switches also provides for arc protection of the load, exactly as they would in a hard-switch. Such a system requires no crowbar protection to protect the load against arcs.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPME082

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPME021

Solid-state Pulsed Klystron Transmitters

2300

K. Schrock, C. Chipman, M.P.J. Gaudreau, B.E. Simpson
Diversified Technologies, Inc., Bedford, Massachusetts, USA

Funding: Lawrence Berkeley National Laboratory Daresbury Laboratory
Diversified Technologies, Inc. (DTI) is currently building and will deliver in early 2014 two solid-state pulsed klystron transmitters. Though not identical, the units are similar in design, and will be delivered to Lawrence Berkeley National Laboratory (LBNL) and Daresbury Laboratory in England. DTI’s goal across these two projects is to develop a complete package which can subsequently be marketed in the high peak power laboratory transmitter market. The modulator is a pulse transformer-coupled hybrid system, including ancillary klystron components (i.e., focus coil, socket) but not the actual klystron tube. Both systems employ a relatively simple modulator, consisting of an energy storage capacitor, a high voltage series switch, a step-up pulse transformer, and a passive pulse-flattening circuit. This arrangement gives an extremely flat pulse and allows the use of a moderate value of storage capacitor. The DTI switch can open or close as commanded, so the pulse width is adjusted by the gate pulse to the system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPME021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)