IPAC2014 - List of Authors (Luo, T.H.)

Paper	Title	Page
MOPME084	Proposal for a Soft X-ray Diffraction Limited Upgrade of the ALS	567
	C. Steier, A. Anders, D. Arbelaez, K.M. Baptiste, W. Barry, J.M. Byrd, K. Chow, S. De Santis, R.M. Duarte, R.W. Falcone, J.-Y. Jung, S.D. Kevan, S. Kwiatkowski, T.H. Luo, A. Madur, H. Nishimura, J.R. Osborn, G.C. Pappas, L.R. Reginato, D. Robin, F. Sannibale, D. Schlueter, C. Sun, C.A. Swenson, H. Tarawneh, W.L. Waldron, W. Wan LBNL, Berkeley, California, USA
	Funding: The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The Advanced Light Source (ALS) at Berkeley Lab has been updated many times and remains as one of the brightest sources for soft x-rays worldwide. However, recent developments in technology, accelerator physics and simulation techniques open the door to much larger future brightness improvements. Similar to proposals at several other 3rd generation sources, this could be achieved by reducing the horizontal emittance with a new ring based on a multi-bend achromat lattice, reusing the existing tunnel, as well as much of the infrastructure and beamlines. After studying candidate lattice designs, development efforts in the last year have concentrated on technology and physics challenges in four main areas: Injection, Vacuum Systems, Magnets and Insertion Devices, as well as main and harmonic RF systems.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPME084
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRO016	Injection/Extraction Kicker for the ALS-U Project	1977
	S. De Santis, W. Barry, S. Kwiatkowski, T.H. Luo, G.C. Pappas, L.R. Reginato, D. Robin, C. Steier, C. Sun, H. Tarawneh, W.L. Waldron LBNL, Berkeley, California, USA
	Funding: Work supported by the US Department of Energy under Contract no. DEAC02-05CH11231 The ALS-II proposal consists in the upgrade of the existing Advanced Light Source at LBNL to a new ultra-low emittance lattice for production of diffraction-limited soft x-rays. In order to compensate for the reduced beam lifetime we intend to operate the machine in continuous top-off mode, where one of several bunch trains is extracted every 30-60 seconds and swapped with a fresh train from the accumulator ring, which is injected on axis without perturbing the circulating beam. In this paper we present a possible design for the injection/extraction kicker based on matched stripline electrodes. The main parameters of such a kicker are discussed in reference to the minimum gap between trains, the storage ring lattice, and the characteristics of a suitable pulser. We also present results from 3D electromagnetic modeling of the proposed kicker performed to evaluate its rise and fall time and field uniformity characteristics.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO016
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI059	Field Emission Study of RF cavity in Static Magnetic Field	3905
	T.H. Luo, D. Li LBNL, Berkeley, California, USA W. Gai ANL, Argonne, Illinois, USA J.H. Shao TUB, Beijing, People's Republic of China
	The RF cavity performance in solenoid magnetic field is crucial for the muon ionization cooling. Previous experiments have shown that the strong external magnetic field can significantly lower the maximum achievable RF voltage in the cavity. The mechanism of this performance degradation has been studied both analytically and experimentally, but so far no conclusive cause has been determined yet. In this paper, we propose an experiment to study the effect of a static B field on the field emission in the RF cavity, which hasn't been investigated before, and which can contribute to the cavity performance degradation in the solenoid field.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI059
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Proposal for a Soft X-ray Diffraction Limited Upgrade of the ALS

567

C. Steier, A. Anders, D. Arbelaez, K.M. Baptiste, W. Barry, J.M. Byrd, K. Chow, S. De Santis, R.M. Duarte, R.W. Falcone, J.-Y. Jung, S.D. Kevan, S. Kwiatkowski, T.H. Luo, A. Madur, H. Nishimura, J.R. Osborn, G.C. Pappas, L.R. Reginato, D. Robin, F. Sannibale, D. Schlueter, C. Sun, C.A. Swenson, H. Tarawneh, W.L. Waldron, W. Wan
LBNL, Berkeley, California, USA

Funding: The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
The Advanced Light Source (ALS) at Berkeley Lab has been updated many times and remains as one of the brightest sources for soft x-rays worldwide. However, recent developments in technology, accelerator physics and simulation techniques open the door to much larger future brightness improvements. Similar to proposals at several other 3rd generation sources, this could be achieved by reducing the horizontal emittance with a new ring based on a multi-bend achromat lattice, reusing the existing tunnel, as well as much of the infrastructure and beamlines. After studying candidate lattice designs, development efforts in the last year have concentrated on technology and physics challenges in four main areas: Injection, Vacuum Systems, Magnets and Insertion Devices, as well as main and harmonic RF systems.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPME084

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRO016

Injection/Extraction Kicker for the ALS-U Project

1977

S. De Santis, W. Barry, S. Kwiatkowski, T.H. Luo, G.C. Pappas, L.R. Reginato, D. Robin, C. Steier, C. Sun, H. Tarawneh, W.L. Waldron
LBNL, Berkeley, California, USA

Funding: Work supported by the US Department of Energy under Contract no. DEAC02-05CH11231
The ALS-II proposal consists in the upgrade of the existing Advanced Light Source at LBNL to a new ultra-low emittance lattice for production of diffraction-limited soft x-rays. In order to compensate for the reduced beam lifetime we intend to operate the machine in continuous top-off mode, where one of several bunch trains is extracted every 30-60 seconds and swapped with a fresh train from the accumulator ring, which is injected on axis without perturbing the circulating beam. In this paper we present a possible design for the injection/extraction kicker based on matched stripline electrodes. The main parameters of such a kicker are discussed in reference to the minimum gap between trains, the storage ring lattice, and the characteristics of a suitable pulser. We also present results from 3D electromagnetic modeling of the proposed kicker performed to evaluate its rise and fall time and field uniformity characteristics.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO016

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI059

Field Emission Study of RF cavity in Static Magnetic Field

3905

T.H. Luo, D. Li
LBNL, Berkeley, California, USA
W. Gai
ANL, Argonne, Illinois, USA
J.H. Shao
TUB, Beijing, People's Republic of China

The RF cavity performance in solenoid magnetic field is crucial for the muon ionization cooling. Previous experiments have shown that the strong external magnetic field can significantly lower the maximum achievable RF voltage in the cavity. The mechanism of this performance degradation has been studied both analytically and experimentally, but so far no conclusive cause has been determined yet. In this paper, we propose an experiment to study the effect of a static B field on the field emission in the RF cavity, which hasn't been investigated before, and which can contribute to the cavity performance degradation in the solenoid field.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI059

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)