IPAC2014 - List of Authors (Hollinger, R.)

Paper	Title	Page
TUPRO043	Status and Computer Simulations for the Front End of the Proton Injector for Fair	1120
	C. Ullmann, R. Berezov, J. Fils, R. Hollinger, V. Ivanova, O.K. Kester, W. Vinzenz GSI, Darmstadt, Germany N. Chauvin, O. Delferrière CEA/IRFU, Gif-sur-Yvette, France
	FAIR - the international facility for antiproton and ion research – located at GSI in Darmstadt, Germany is one of the largest research projects worldwide. It will provide an antiproton production rate of 7·10¹⁰ cooled pbars per hour, which is equivalent to a primary proton beam current of 2·1016 protons per hour. A high intensity proton linac (p-linac) will be built, with an operating rf-frequency of 325 MHz to accelerate a 70 mA proton beam up to 70 MeV, using conducting crossed-bar H-cavities. The repetition rate is 4 Hz with an ion beam pulse length of 36 μs[1]. Developed within a joint French-German collaboration - GSI/CEA-SACLAY/IAP – the compact proton linac will be injected by a microwave ion source and a low energy beam transport (LEBT). The 2.45 GHz ion source allows high brightness ion beams at an energy of 95 keV and will deliver a proton beam current of 100 mA at the entrance of the RFQ (Radio Frequency Quadrupole) within an emittance of 0.3π mm mrad (rms). To check on these parameters computer simulations with TraceWin, IGUN and IBSIMU of the ion extraction and LEBT (Low Energy Beam Transport) are performed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRO043
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME006	Straight Injection of an intense Uranium Beam into the GSI High Current RFQ	3217
	H. Vormann, A. Adonin, W.A. Barth, L.A. Dahl, P. Gerhard, L. Groening, R. Hollinger, M.T. Maier, S. Mickat, A. Orzhekhovskaya, C. Xiao, S.G. Yaramyshev GSI, Darmstadt, Germany
	A dedicated high current uranium ion source and LEBT will be built at the GSI High Current Injector (HSI), to fulfil the intensity requirements for FAIR (Facility for Antiproton and Ion Research at Darmstadt). This new injection line will be integrated into the existing complex which already comprises two branches. The new LEBT is designed as a straight injection line without dipole magnet, i.e. without dispersive charge state separation. All uranium charge states, coming from the ion source, are transported to the heavy ion high current GSI-HSI-RFQ. Only the design charge state U⁴⁺ is accelerated to the final RFQ energy. The new LEBT design is based on beam emittance and current measurements behind the existing ion source. Beam dynamics simulations have been performed with the codes TRACE-3D (envelopes), DYNAMION, BEAMPATH and TRACK (multiparticle). The recent layout of the LEBT, as well as the results of beam dynamics studies are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME007	A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations	3220
	S.G. Yaramyshev, A. Adonin, W.A. Barth, L.A. Dahl, P. Gerhard, L. Groening, R. Hollinger, M.T. Maier, S. Mickat, A. Orzhekhovskaya, H. Vormann GSI, Darmstadt, Germany
	A new Low Energy Beam Transport (LEBT) for multi-charge uranium beam will be built at GSI High Current Injector. All uranium charge states coming from the new ion source will be injected into GSI heavy ion high current HSI-RFQ, but only design ions U⁴⁺ will be accelerated to the final RFQ energy. A detailed knowledge about injected beam- current and -emittance for pure design U⁴⁺ ions is necessary for a proper beam line design commissioning and operation, while the measurements are possible only for a full beam including all charge states. Detailed measurements of beam current and emittance are performed behind the first quadrupole triplet at the beam line. A dedicated algorithm, based on combination of measurements and results of an advanced beam dynamics simulations, provides for an extraction of beam- current and -emittance for only U⁴⁺ component of a beam. The obtained results and final beam dynamics design for the new straight beam line are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME007
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status and Computer Simulations for the Front End of the Proton Injector for Fair

1120

C. Ullmann, R. Berezov, J. Fils, R. Hollinger, V. Ivanova, O.K. Kester, W. Vinzenz
GSI, Darmstadt, Germany
N. Chauvin, O. Delferrière
CEA/IRFU, Gif-sur-Yvette, France

FAIR - the international facility for antiproton and ion research – located at GSI in Darmstadt, Germany is one of the largest research projects worldwide. It will provide an antiproton production rate of 7·10¹⁰ cooled pbars per hour, which is equivalent to a primary proton beam current of 2·1016 protons per hour. A high intensity proton linac (p-linac) will be built, with an operating rf-frequency of 325 MHz to accelerate a 70 mA proton beam up to 70 MeV, using conducting crossed-bar H-cavities. The repetition rate is 4 Hz with an ion beam pulse length of 36 μs[1]. Developed within a joint French-German collaboration - GSI/CEA-SACLAY/IAP – the compact proton linac will be injected by a microwave ion source and a low energy beam transport (LEBT). The 2.45 GHz ion source allows high brightness ion beams at an energy of 95 keV and will deliver a proton beam current of 100 mA at the entrance of the RFQ (Radio Frequency Quadrupole) within an emittance of 0.3π mm mrad (rms). To check on these parameters computer simulations with TraceWin, IGUN and IBSIMU of the ion extraction and LEBT (Low Energy Beam Transport) are performed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRO043

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME006

Straight Injection of an intense Uranium Beam into the GSI High Current RFQ

3217

H. Vormann, A. Adonin, W.A. Barth, L.A. Dahl, P. Gerhard, L. Groening, R. Hollinger, M.T. Maier, S. Mickat, A. Orzhekhovskaya, C. Xiao, S.G. Yaramyshev
GSI, Darmstadt, Germany

A dedicated high current uranium ion source and LEBT will be built at the GSI High Current Injector (HSI), to fulfil the intensity requirements for FAIR (Facility for Antiproton and Ion Research at Darmstadt). This new injection line will be integrated into the existing complex which already comprises two branches. The new LEBT is designed as a straight injection line without dipole magnet, i.e. without dispersive charge state separation. All uranium charge states, coming from the ion source, are transported to the heavy ion high current GSI-HSI-RFQ. Only the design charge state U⁴⁺ is accelerated to the final RFQ energy. The new LEBT design is based on beam emittance and current measurements behind the existing ion source. Beam dynamics simulations have been performed with the codes TRACE-3D (envelopes), DYNAMION, BEAMPATH and TRACK (multiparticle). The recent layout of the LEBT, as well as the results of beam dynamics studies are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME007

A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations

3220

S.G. Yaramyshev, A. Adonin, W.A. Barth, L.A. Dahl, P. Gerhard, L. Groening, R. Hollinger, M.T. Maier, S. Mickat, A. Orzhekhovskaya, H. Vormann
GSI, Darmstadt, Germany

A new Low Energy Beam Transport (LEBT) for multi-charge uranium beam will be built at GSI High Current Injector. All uranium charge states coming from the new ion source will be injected into GSI heavy ion high current HSI-RFQ, but only design ions U⁴⁺ will be accelerated to the final RFQ energy. A detailed knowledge about injected beam- current and -emittance for pure design U⁴⁺ ions is necessary for a proper beam line design commissioning and operation, while the measurements are possible only for a full beam including all charge states. Detailed measurements of beam current and emittance are performed behind the first quadrupole triplet at the beam line. A dedicated algorithm, based on combination of measurements and results of an advanced beam dynamics simulations, provides for an extraction of beam- current and -emittance for only U⁴⁺ component of a beam. The obtained results and final beam dynamics design for the new straight beam line are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME007

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)