IPAC2014 - List of Authors (Chen, J.)

Paper	Title	Page
TUPRI113	Integration of the Timing System for TPS	1833
	C.Y. Wu, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.S. Huang, D. Lee, C.Y. Liao NSRRC, Hsinchu, Taiwan
	Timing system for the Taiwan Photon Source (TPS) were setup and ready for accelerator system commissioning. Event based timing system was chosen to satisfy various requirements for the machine and experiments. The system consist of event generator and multiple event receivers which installed local control nodes. The system is ready in the first quarter of 2014. Performance and functionality are investigated systematically. Parameters like delay, skew, latency, drift due to ambient temperature variation, etc. will be addressed. This report wills summary progress of TPS timing system before system delivery for accelerator commissioning.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI113
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO122	Control System of the Taiwan Photon Source for Commissioning	3177
	Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Control system for the Taiwan Photon Source (TPS) project was implemented. The system is ready for commissioning of the accelerators. Final integration test is in proceeding. The EPICS was chosen as control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) are implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in proceeding. The efforts will be summarized at this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO122
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO123	Control System of EPU48 in TPS	3180
	C.Y. Wu, J. Chen, Y.-S. Cheng, K.T. Hsu, D. Lee, C.Y. Liao NSRRC, Hsinchu, Taiwan
	Insertion device (ID) is a crucial component in third-generation synchrotron light sources, which can produces highly-brilliant, forward-directed and quasi-monochromatic radiation over a broad energy range for various experiments. In the phase I of the Taiwan Photon Source (TPS) project, two EPU48s (Elliptically Polarized Undulator) will be installed. The control system for EPU48 is based on the EPICS architecture. All control functionality coordinate by the cPCI EPICS IOC. The main control components include the motor with encoder for gap adjustment and phase moving, trimming power supply for corrector magnets, temperature sensors for ID environmental monitoring , interlock system (limit switches, tilt sensor, emergency button) for safety and supporting of on-the-fly experiments for beamline. Features and benefits of EPU48 control system will be summarized in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO123
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO124	Waveform Remote Supports for the Taiwan Photon Source Project	3183
	Y.-S. Cheng, J. Chen, P.C. Chiu, K.T. Hsu, K.H. Hu, C.Y. Liao, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The 3 GeV Taiwan Photon Source (TPS) synchrotron light source is ready for commissioning. Various waveforms includes booster power supply current, pulse magnets current, beam signal, and etc. need monitoring to support commission and routine operation. Remote access of waveforms and spectrums from various digitizer, oscilloscope and spectrum analyzer were implemented to eliminate requirements of long distance cabling and to improve signal quality. Various EPICS supports of Ethernet-based oscilloscope and spectrum analyzer for the TPS are developed for filling pattern measurement, beam spectrum, pulse magnet power supply, and etc. Different operation interfaces to integrate waveform and spectrum acquisition are implemented by various GUI tools to satisfy all kinds of applications. The efforts will be summarized at this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO124
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO126	Implementation of Machine Protection System for the Taiwan Photon Source	3189
	C.Y. Liao, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The Taiwan Photon Source (TPS) is being constructed at the campus of the NSRRC (National Synchrotron Radiation Research Center) and commissioning expected in 2014. In order to prevent damage to accelerator components induced by various events, a global machine protection system (MPS) was installed and implemented. The MPS collect interlocks and beam dump requests from various system (thermo/flow of magnets, front-end, vacuum system, and orbit excursion interlock), perform decision, transmit dump beam request to E-Gun or RF system. The PLC based system with embedded EPICS IOC was used as a slow MPS which can delivery less than 8 msec reaction time. The fast MPS was dependent on event based timing system to deliver response time less than 5 μs. Trigger signal for post-mortem will also be distributed by the fast MPS. To ensure alive of the system, several self-diagnostics mechanisms include heartbeat and transient capture were implemented and tested. The MPS architecture, installation, and validation test results were presented in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO126
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME137	Preliminary Study of Non-invasive Beam Profile Measurements for Proton Beams	3569
	H. He, J.S. Cao, Q.Y. Deng, J.H. Junhui, Y.F. Sui, J. Yue, Y. Zhao IHEP, Beijing, People's Republic of China J. Chen NSRRC, Hsinchu, Taiwan
	Funding: This work was supported by NSFC under grant NO.11305186 and No.11205172 Two non-invasive beam profile measurement methods were developed for China high intensity proton beams projects, including CSNS and ADS. The first consists in an IPM (ionization beam profile monitor) system which detect the ionized products from a collision of the beam particle with residual gas atoms or molecules present in the vacuum pipe. The second is an electron beam scanner which using a low energy electron beam instead of a metal wire to sweep through the beam. The deflection of electron beam by the collective field of the high intensity beam is measured. The charge density in the high intensity beam can be restored under certain conditions or estimated by various mathematical techniques. Here we present the design parameters of the IPM system, the signal intensity of ionization products, optimization of the electric field, machine designs of electrode, tracking of the ionization products and so on. The principle of the electron beam scanner and the test results which is based on a commercial electron gun from Kimball Physics are also introduced in details.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME137
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Integration of the Timing System for TPS

1833

C.Y. Wu, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.S. Huang, D. Lee, C.Y. Liao
NSRRC, Hsinchu, Taiwan

Timing system for the Taiwan Photon Source (TPS) were setup and ready for accelerator system commissioning. Event based timing system was chosen to satisfy various requirements for the machine and experiments. The system consist of event generator and multiple event receivers which installed local control nodes. The system is ready in the first quarter of 2014. Performance and functionality are investigated systematically. Parameters like delay, skew, latency, drift due to ambient temperature variation, etc. will be addressed. This report wills summary progress of TPS timing system before system delivery for accelerator commissioning.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI113

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO122

Control System of the Taiwan Photon Source for Commissioning

3177

Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.Y. Liao, C.-J. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Control system for the Taiwan Photon Source (TPS) project was implemented. The system is ready for commissioning of the accelerators. Final integration test is in proceeding. The EPICS was chosen as control system framework. The subsystems control interfaces include event based timing system, Ethernet based power supply control, corrector power supply control, PLC-based pulse magnet power supply control and machine protection system, insertion devices motion control system, various diagnostics, and etc. The standard hardware components had been installed and integrated, and the various IOCs (Input Output Controller) are implemented as various subsystems control platforms. Development and test of the high level and low level software systems are in proceeding. The efforts will be summarized at this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO122

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO123

Control System of EPU48 in TPS

3180

C.Y. Wu, J. Chen, Y.-S. Cheng, K.T. Hsu, D. Lee, C.Y. Liao
NSRRC, Hsinchu, Taiwan

Insertion device (ID) is a crucial component in third-generation synchrotron light sources, which can produces highly-brilliant, forward-directed and quasi-monochromatic radiation over a broad energy range for various experiments. In the phase I of the Taiwan Photon Source (TPS) project, two EPU48s (Elliptically Polarized Undulator) will be installed. The control system for EPU48 is based on the EPICS architecture. All control functionality coordinate by the cPCI EPICS IOC. The main control components include the motor with encoder for gap adjustment and phase moving, trimming power supply for corrector magnets, temperature sensors for ID environmental monitoring , interlock system (limit switches, tilt sensor, emergency button) for safety and supporting of on-the-fly experiments for beamline. Features and benefits of EPU48 control system will be summarized in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO123

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO124

Waveform Remote Supports for the Taiwan Photon Source Project

3183

Y.-S. Cheng, J. Chen, P.C. Chiu, K.T. Hsu, K.H. Hu, C.Y. Liao, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The 3 GeV Taiwan Photon Source (TPS) synchrotron light source is ready for commissioning. Various waveforms includes booster power supply current, pulse magnets current, beam signal, and etc. need monitoring to support commission and routine operation. Remote access of waveforms and spectrums from various digitizer, oscilloscope and spectrum analyzer were implemented to eliminate requirements of long distance cabling and to improve signal quality. Various EPICS supports of Ethernet-based oscilloscope and spectrum analyzer for the TPS are developed for filling pattern measurement, beam spectrum, pulse magnet power supply, and etc. Different operation interfaces to integrate waveform and spectrum acquisition are implemented by various GUI tools to satisfy all kinds of applications. The efforts will be summarized at this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO124

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO126

Implementation of Machine Protection System for the Taiwan Photon Source

3189

C.Y. Liao, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The Taiwan Photon Source (TPS) is being constructed at the campus of the NSRRC (National Synchrotron Radiation Research Center) and commissioning expected in 2014. In order to prevent damage to accelerator components induced by various events, a global machine protection system (MPS) was installed and implemented. The MPS collect interlocks and beam dump requests from various system (thermo/flow of magnets, front-end, vacuum system, and orbit excursion interlock), perform decision, transmit dump beam request to E-Gun or RF system. The PLC based system with embedded EPICS IOC was used as a slow MPS which can delivery less than 8 msec reaction time. The fast MPS was dependent on event based timing system to deliver response time less than 5 μs. Trigger signal for post-mortem will also be distributed by the fast MPS. To ensure alive of the system, several self-diagnostics mechanisms include heartbeat and transient capture were implemented and tested. The MPS architecture, installation, and validation test results were presented in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO126

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME137

Preliminary Study of Non-invasive Beam Profile Measurements for Proton Beams

3569

H. He, J.S. Cao, Q.Y. Deng, J.H. Junhui, Y.F. Sui, J. Yue, Y. Zhao
IHEP, Beijing, People's Republic of China
J. Chen
NSRRC, Hsinchu, Taiwan

Funding: This work was supported by NSFC under grant NO.11305186 and No.11205172
Two non-invasive beam profile measurement methods were developed for China high intensity proton beams projects, including CSNS and ADS. The first consists in an IPM (ionization beam profile monitor) system which detect the ionized products from a collision of the beam particle with residual gas atoms or molecules present in the vacuum pipe. The second is an electron beam scanner which using a low energy electron beam instead of a metal wire to sweep through the beam. The deflection of electron beam by the collective field of the high intensity beam is measured. The charge density in the high intensity beam can be restored under certain conditions or estimated by various mathematical techniques. Here we present the design parameters of the IPM system, the signal intensity of ionization products, optimization of the electric field, machine designs of electrode, tracking of the ionization products and so on. The principle of the electron beam scanner and the test results which is based on a commercial electron gun from Kimball Physics are also introduced in details.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME137

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)