IPAC2014 - List of Authors (Aloev, A.V.)

Paper	Title	Page
TUPRO104	Design of the Beam Transfer Line Magnets for HIE-ISOLDE	1289
	J. Bauche, A.V. Aloev CERN, Geneva, Switzerland
	This paper describes the design of the beam transfer line magnets of the HIE-ISOLDE facility. The technical solutions selected to face the challenges associated with the machine requirements are presented, and the final design parameters and field quality are reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRO104
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPME006	Considerations for a QD0 with Hybrid Technology in ILC	1346
	M. Modena, A.V. Aloev, H. Garcia, L. Gatignon, R. Tomás CERN, Geneva, Switzerland
	The baseline design of the QD0 magnet for ILC, the International Linear Collider, is a very compact superconducting quadrupole (coil-dominated magnet). A prototype of this quadrupole is under construction at Brookhaven National Laboratory (USA). In CLIC, the Compact Linear Collider under study at CERN, we are studying another conceptual solution for the QD0. This is due to two main reasons: all the magnets of the Beam Delivery System will need to be stabilized in the nano-meter range and extremely tight alignment tolerances are required. The proposed solution, now baseline for CLIC, is a room temperature hybrid quadrupole based on electromagnetic coils and permanent magnet blocks (iron-dominated magnet). In this paper we present a conceptual design for a hybrid solution studied and adapted also to the ILC project. A special super-ferric solution is proposed to make the cross section compatible with the experiments layout. This design matches the compactness requirement with the advantages of stability and alignment precision, aspects critical also for ILC in order to achieve the design luminosity. Final Focus optics design considerations for this solution are also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPME006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPME007	Status of CLIC Magnets Studies and R&D	1350
	M. Modena, A.V. Aloev, E. Solodko, P.A. Thonet, A.S. Vorozhtsov CERN, Geneva, Switzerland
	Since 2009 the CERN Magnet Group (CERN-TE-MSC) started R&D activities in order to focalize the most challenging and interesting cases to be studied among the magnets needed for CLIC the Compact Linear Collider. In the last four years several theoretic studies, models and prototypes were realized mainly in two domains: magnets for the Modules, the modular elements that are composing the backbone of the two-beam linac structure of CLIC, and the Machine Detector Interface (MDI) including the Final Focus elements, and the anti-solenoid. In this paper we revise the status for the procured magnets. Among them the Drive Beam Quadrupoles, Main Beam Quadrupoles, Steering Correctors all challenging for the required compactness, performances and production size, and the QD0 final quadrupole and the close SD0 sextupole, challenging for the high performances required in terms of gradients and stability.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPME007
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of the Beam Transfer Line Magnets for HIE-ISOLDE

1289

J. Bauche, A.V. Aloev
CERN, Geneva, Switzerland

This paper describes the design of the beam transfer line magnets of the HIE-ISOLDE facility. The technical solutions selected to face the challenges associated with the machine requirements are presented, and the final design parameters and field quality are reported.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRO104

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPME006

Considerations for a QD0 with Hybrid Technology in ILC

1346

M. Modena, A.V. Aloev, H. Garcia, L. Gatignon, R. Tomás
CERN, Geneva, Switzerland

The baseline design of the QD0 magnet for ILC, the International Linear Collider, is a very compact superconducting quadrupole (coil-dominated magnet). A prototype of this quadrupole is under construction at Brookhaven National Laboratory (USA). In CLIC, the Compact Linear Collider under study at CERN, we are studying another conceptual solution for the QD0. This is due to two main reasons: all the magnets of the Beam Delivery System will need to be stabilized in the nano-meter range and extremely tight alignment tolerances are required. The proposed solution, now baseline for CLIC, is a room temperature hybrid quadrupole based on electromagnetic coils and permanent magnet blocks (iron-dominated magnet). In this paper we present a conceptual design for a hybrid solution studied and adapted also to the ILC project. A special super-ferric solution is proposed to make the cross section compatible with the experiments layout. This design matches the compactness requirement with the advantages of stability and alignment precision, aspects critical also for ILC in order to achieve the design luminosity. Final Focus optics design considerations for this solution are also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPME006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPME007

Status of CLIC Magnets Studies and R&D

1350

M. Modena, A.V. Aloev, E. Solodko, P.A. Thonet, A.S. Vorozhtsov
CERN, Geneva, Switzerland

Since 2009 the CERN Magnet Group (CERN-TE-MSC) started R&D activities in order to focalize the most challenging and interesting cases to be studied among the magnets needed for CLIC the Compact Linear Collider. In the last four years several theoretic studies, models and prototypes were realized mainly in two domains: magnets for the Modules, the modular elements that are composing the backbone of the two-beam linac structure of CLIC, and the Machine Detector Interface (MDI) including the Final Focus elements, and the anti-solenoid. In this paper we revise the status for the procured magnets. Among them the Drive Beam Quadrupoles, Main Beam Quadrupoles, Steering Correctors all challenging for the required compactness, performances and production size, and the QD0 final quadrupole and the close SD0 sextupole, challenging for the high performances required in terms of gradients and stability.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPME007

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)