Author: Saha, P.K.
Paper Title Page
WEPO006 Suppression of Leakage Fields from DC Magnets in J-PARC 3 GeV RCS 2412
 
  • M. Yoshimoto, H. Harada, N. Hayashi, H. Hotchi, M. Kinsho, P.K. Saha, K. Yamamoto
    JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
 
  In the J-PARC 3 GeV RCS, we found that DC leakage fields from the extraction beam line significantly affected the beam. For this issue, we installed additional shields and got the 40% reduction of the DC leakage field. Thus the circulating beam loss was successfully reduced. In this presentation, we report the detail of the shield structure and the results of the beam studies.  
 
WEPS096 Injection Energy Recovery of J-PARC RCS 2730
 
  • N. Hayashi, H. Hotchi, J. Kamiya, P.K. Saha, T. Takayanagi, K. Yamamoto, M. Yamamoto, Y. Yamazaki
    JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
 
  The J-PARC RCS is a high beam power Rapid-Cycling Synchrotron (RCS). The original designed injection energy is 400MeV, although presently it is 181MeV, and its beam power is limited to 0.6MW. Works to recover the Linac energy are ongoing and injection magnets power supplies upgrade are required in the RCS. In order to achieve 1MW designed beam power, new instrumentation is also planned simultaneously. Activities related injection energy recovery in the J-PARC RCS is presented.  
 
THPS040 Measurement of the Stripping Efficiency for HBC Stripper Foil in the 3-GeV RCS of J-PARC 3511
 
  • P.K. Saha, H. Harada, S. Hatakeyama, H. Hotchi, M. Kinsho, Y. Yamazaki, M. Yoshimoto
    JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
  • Y. Irie, I. Sugai
    KEK, Ibaraki, Japan
 
  We have carried out experimental measurement of the stripping efficiency for the newly developed HBC (Hybrid type Boron doped Carbon) stripper foils. The HBC foil is used for charge-exchange injection in the RCS (Rapid Cycling Synchrotron) of J-PARC (Japan Proton Accelerator Research Complex) and plays an important role for the RCS operation. We have developed a rather simple but very precise method using which stripping efficiencies for several HBC foils were determined accurately. Importance of knowing an accurate stripping efficiency so as to determine a realistic stripper foil for the RCS operation will be discussed.