IPAC2011 - List of Authors (Lebet, S.)

Paper	Title	Page
MOPC012	Fabrication of the CERN/PSI/ST X-band Accelerating Structures	86
	M.M. Dehler, A. Citterio, R. Zennaro PSI, Villigen, Switzerland S. Atieh, D. Gudkov, S. Lebet, G. Riddone, J. Shi CERN, Geneva, Switzerland G. D'Auria, C. Serpico ELETTRA, Basovizza, Italy
	Within a collaboration between CERN, PSI and Sincrotrone Trieste (ST), a multi- purpose X-band accelerating structure has been designed and fabricated, used for high gradients tests in the CLIC structure testing program and in the FEL projects of PSI and ST. The structure has 72 cells with a phase advance of 5 pi/6 and includes upstream and downstream wakefield monitors to measure the beam alignment. The SLAC mode launcher design is used to feed it with RF power. Following the CERN fabrication procedures for high-gradient structure, diffusion bonding and brazing in hydrogen atmosphere is used to assemble the cells. After tuning, a vacuum bakeout is required before the feedthroughs for the wake field monitors are welded in as a last step. We describe the experiences gained in finishing the first two structures out of a series of four and present the results from the RF tuning and low level RF tests.

TUPS099	A Study of the Surface Quality of High Purity Copper after Heat Treatment	1771
	M. Aicheler, G. Arnau-Izquierdo, S. Atieh, S. Calatroni, S. Lebet, G. Riddone, A. Samoshkin CERN, Geneva, Switzerland
	The manufacturing flow of accelerating structures for the compact linear collider, based on diamond-machined high purity copper components, include several thermal cycles (diffusion bonding, brazing of cooling circuits, baking in vacuum, etc.). The high temperature cycles may be carried out following different schedules and environments (vacuum, reducing hydrogen atmosphere, argon, etc.) and develop peculiar surface topographies which have been the object of extended observations. This study presents and discusses the results of scanning electron microscopy (SEM) and optical microscopy investigations.

Paper

Title

Page

Fabrication of the CERN/PSI/ST X-band Accelerating Structures

86

M.M. Dehler, A. Citterio, R. Zennaro
PSI, Villigen, Switzerland
S. Atieh, D. Gudkov, S. Lebet, G. Riddone, J. Shi
CERN, Geneva, Switzerland
G. D'Auria, C. Serpico
ELETTRA, Basovizza, Italy

Within a collaboration between CERN, PSI and Sincrotrone Trieste (ST), a multi- purpose X-band accelerating structure has been designed and fabricated, used for high gradients tests in the CLIC structure testing program and in the FEL projects of PSI and ST. The structure has 72 cells with a phase advance of 5 pi/6 and includes upstream and downstream wakefield monitors to measure the beam alignment. The SLAC mode launcher design is used to feed it with RF power. Following the CERN fabrication procedures for high-gradient structure, diffusion bonding and brazing in hydrogen atmosphere is used to assemble the cells. After tuning, a vacuum bakeout is required before the feedthroughs for the wake field monitors are welded in as a last step. We describe the experiences gained in finishing the first two structures out of a series of four and present the results from the RF tuning and low level RF tests.

TUPS099

A Study of the Surface Quality of High Purity Copper after Heat Treatment

1771

M. Aicheler, G. Arnau-Izquierdo, S. Atieh, S. Calatroni, S. Lebet, G. Riddone, A. Samoshkin
CERN, Geneva, Switzerland

The manufacturing flow of accelerating structures for the compact linear collider, based on diamond-machined high purity copper components, include several thermal cycles (diffusion bonding, brazing of cooling circuits, baking in vacuum, etc.). The high temperature cycles may be carried out following different schedules and environments (vacuum, reducing hydrogen atmosphere, argon, etc.) and develop peculiar surface topographies which have been the object of extended observations. This study presents and discusses the results of scanning electron microscopy (SEM) and optical microscopy investigations.