IPAC2011 - List of Authors (Boffo, C.)

Paper	Title	Page
THPC159	Factory Acceptance Test of COLDDIAG: A Cold Vacuum Chamber for Diagnostics	3263
	S. Gerstl, T. Baumbach, S. Casalbuoni, A.W. Grau, M. Hagelstein, T. Holubek, D. Saez de Jauregui Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany V. Baglin CERN, Geneva, Switzerland C. Boffo, G. Sikler BNG, Würzburg, Germany T.W. Bradshaw STFC/RAL, Chilton, Didcot, Oxon, United Kingdom R. Cimino, M. Commisso, A. Mostacci, B. Spataro INFN/LNF, Frascati (Roma), Italy J.A. Clarke, R.M. Jones, D.J. Scott Cockcroft Institute, Warrington, Cheshire, United Kingdom M.P. Cox, J.C. Schouten Diamond, Oxfordshire, United Kingdom I.R.R. Shinton UMAN, Manchester, United Kingdom E.J. Wallén MAX-lab, Lund, Sweden R. Weigel Max-Planck Institute for Metal Research, Stuttgart, Germany
	Superconductive insertion devices (IDs) have higher fields for a given gap and period length compared with the state-of-the-art technology of permanent magnet IDs. One of the still open issues for the development of superconductive insertion devices is the understanding of the heat intake from the electron beam. With the aim of measuring the beam heat load to a cold bore and the hope to gain a deeper understanding in the underlying mechanisms, a cold vacuum chamber for diagnostics was built. It is equipped with the following instrumentation: retarding field analyzers to measure the electron flux, temperature sensors to measure the beam heat load, pressure gauges, and mass spectrometers to measure the gas content. The flexibility of the engineering design will allow the installation of the cryostat in different synchrotron light sources. The installation in the storage ring of the Diamond Light Source is foreseen in November 2011. Here we report about the technical design of this device, the factory acceptance test and the planned measurements with electron beam.

THPC160	A Superconducting Switch for Insertion Devices with Variable Period Length	3266
	T. Holubek, T. Baumbach, S. Casalbuoni, S. Gerstl, A.W. Grau, M. Hagelstein, D. Saez de Jauregui Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany C. Boffo, W. Walter BNG, Würzburg, Germany
	Superconducting insertion devices (IDs) are very attractive for synchrotron light sources since they offer the possibility to enhance the tuning range and functionality significantly by period length switching. Period length switching can be realized by employing two or more individually powerable subsets of superconducting coils and by reversing the current in a part of the winding. So far, the first demonstration mock-up coil allowing period length tripling was fabricated and tested successfully. Here, we report on the feasibility of a superconducting switch operating at 4.2 K, immersed in a liquid Helium bath as well as under conduction cooled conditions.

Paper

Title

Page

Factory Acceptance Test of COLDDIAG: A Cold Vacuum Chamber for Diagnostics

3263

S. Gerstl, T. Baumbach, S. Casalbuoni, A.W. Grau, M. Hagelstein, T. Holubek, D. Saez de Jauregui
Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
V. Baglin
CERN, Geneva, Switzerland
C. Boffo, G. Sikler
BNG, Würzburg, Germany
T.W. Bradshaw
STFC/RAL, Chilton, Didcot, Oxon, United Kingdom
R. Cimino, M. Commisso, A. Mostacci, B. Spataro
INFN/LNF, Frascati (Roma), Italy
J.A. Clarke, R.M. Jones, D.J. Scott
Cockcroft Institute, Warrington, Cheshire, United Kingdom
M.P. Cox, J.C. Schouten
Diamond, Oxfordshire, United Kingdom
I.R.R. Shinton
UMAN, Manchester, United Kingdom
E.J. Wallén
MAX-lab, Lund, Sweden
R. Weigel
Max-Planck Institute for Metal Research, Stuttgart, Germany

Superconductive insertion devices (IDs) have higher fields for a given gap and period length compared with the state-of-the-art technology of permanent magnet IDs. One of the still open issues for the development of superconductive insertion devices is the understanding of the heat intake from the electron beam. With the aim of measuring the beam heat load to a cold bore and the hope to gain a deeper understanding in the underlying mechanisms, a cold vacuum chamber for diagnostics was built. It is equipped with the following instrumentation: retarding field analyzers to measure the electron flux, temperature sensors to measure the beam heat load, pressure gauges, and mass spectrometers to measure the gas content. The flexibility of the engineering design will allow the installation of the cryostat in different synchrotron light sources. The installation in the storage ring of the Diamond Light Source is foreseen in November 2011. Here we report about the technical design of this device, the factory acceptance test and the planned measurements with electron beam.

THPC160

A Superconducting Switch for Insertion Devices with Variable Period Length

3266

T. Holubek, T. Baumbach, S. Casalbuoni, S. Gerstl, A.W. Grau, M. Hagelstein, D. Saez de Jauregui
Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
C. Boffo, W. Walter
BNG, Würzburg, Germany

Superconducting insertion devices (IDs) are very attractive for synchrotron light sources since they offer the possibility to enhance the tuning range and functionality significantly by period length switching. Period length switching can be realized by employing two or more individually powerable subsets of superconducting coils and by reversing the current in a part of the winding. So far, the first demonstration mock-up coil allowing period length tripling was fabricated and tested successfully. Here, we report on the feasibility of a superconducting switch operating at 4.2 K, immersed in a liquid Helium bath as well as under conduction cooled conditions.