IPAC2011 - List of Authors (Balleyguier, P.)

Paper	Title	Page
TUPS075	Experimental determination of impedance and delay time of the 100 Ω meander transmission line for the SPIRAL2 Single Bunch Selector	1710
	M. Di Giacomo GANIL, Caen, France P. Balleyguier CEA/DAM/DPTA/SP2A, Bruyères-le-Châtel, France A.C. Caruso, F. Consoli INFN/LNS, Catania, Italy A. Longhitano ALTEK, San Gregorio (CATANIA), Italy
	The Spiral2 driver requires a Single Bunch Selector to reduce the bunch repetition rate at the experimental targets. A 100 Ω meander line is used in the beta 0.04 medium energy line of the Spiral2 driver. The non standard characteristic impedance figure helps to reduce the pulsed power but introduces the problem of calibrated measurements. The paper describes the results of the different methods used to measure the impedance and the delay of the electrodes.

Paper

Title

Page

Experimental determination of impedance and delay time of the 100 Ω meander transmission line for the SPIRAL2 Single Bunch Selector

1710

M. Di Giacomo
GANIL, Caen, France
P. Balleyguier
CEA/DAM/DPTA/SP2A, Bruyères-le-Châtel, France
A.C. Caruso, F. Consoli
INFN/LNS, Catania, Italy
A. Longhitano
ALTEK, San Gregorio (CATANIA), Italy

The Spiral2 driver requires a Single Bunch Selector to reduce the bunch repetition rate at the experimental targets. A 100 Ω meander line is used in the beta 0.04 medium energy line of the Spiral2 driver. The non standard characteristic impedance figure helps to reduce the pulsed power but introduces the problem of calibrated measurements. The paper describes the results of the different methods used to measure the impedance and the delay of the electrodes.