A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Petrosyan, G.

Paper Title Page
TUPEA039 Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL 1416
 
  • V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, V. Vogel
    DESY, Hamburg
 
 

The Free Electron Laser in Hamburg (FLASH) is a user facility providing high brilliant laser light for experiments. It is also a unique facility for testing the superconducting accelerator technologies. FLASH cavities are operating at pulsed mode. There is a filling stage to build the RF voltage in the cavities and then follow a flattop for beam operation. By the limitation of the klystron pulse length the filling time of the cavities is limited to several hundred microseconds. In order to fill the cavities to the dedicated voltage usually large RF power is required for the filling stage. For European XFEL during RF operation the klystrons will be working quite near the saturation point for better efficiency. So lowering the unnecessary klystron peak power under closed loop operation is very important for close-limitation operation. The paper will present the method which allows decreasing the required klystron peak power as well as the reflected power by filling the cavity in resonance. Simulation results will be presented as well as experimental demonstrations at FLASH.