A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Hunte, F.

Paper Title Page
MOPEB055 YBCO Conductor Technology for High Field Muon Cooling Magnets 394
 
  • S.A. Kahn, G. Flanagan, R.P. Johnson, M. Turenne
    Muons, Inc, Batavia
  • F. Hunte, J. Schwartz
    North Carolina State University, Raleigh, North Carolina
 
 

YBCO superconductors originally developed for high temperature operation carry significant critical current even in the presence of extremely high magnetic field when operated at low temperature. The final stage of phase space cooling for a muon collider uses a solenoid magnet with fields approaching 50 T. As part of an R&D effort we present measurements of mechanical and electromechanical properties of the YBCO conductor. We examine the critical current verses magnet field angle at 4.2 K in a magnetic field. Quench properties of the conductor such as minimum quench energy threshold and quench propagation velocity will be measured to establish safe operational conductions for the muon cooling magnets. In this paper we describe a conceptual picture for a high field solenoid to be used for muon phase space cooling that incorporates these low temperature properties of YBCO.

 
MOPEB057 Roebel Cable for High-field Low-loss Accelerator Magnets 397
 
  • M. Turenne, R.P. Johnson
    Muons, Inc, Batavia
  • F. Hunte, J. Schwartz
    North Carolina State University, Raleigh, North Carolina
  • H. Song
    NHMFL, Tallahassee, Florida
 
 

High field accelerator magnets are needed for high energy physics applications. Superconducting materials able to reach these fields with low losses are required, and YBCO Roebel cable is being developed to address this issue. Characterization of commercially available Roebel cables for high field low temperature superconducting magnets is needed. YBCO Roebel cable with low AC losses is being developed and has limited commercial availability. Its behavior is not fully understood, however, especially in liquid helium and at high magnetic fields. YBCO Roebel cable will be acquired from a commercial vendor and characterized at cryogenic temperatures, in varying magnetic fields, and different strain configurations. A comprehensive behavior analysis will be performed, including operational and fatigue limits. Characterization of YBCO Roebel cable at low temperatures will be performed, including determination of the current flow path in steady-state and during quench using magneto-optical imaging, investigation of the effects of strand insulation, and examination of the mechanical and quench behavior at 4.2 K, 77 K, and varying magnetic fields.

 
MOPEB058 Characterization of REBCO Coated Conductors for High Field Magnets 400
 
  • M. Turenne, R.P. Johnson, S.A. Kahn
    Muons, Inc, Batavia
  • F. Hunte, J. Schwartz, L. Ye
    North Carolina State University, Raleigh, North Carolina
 
 

Magnet applications for high energy physics has long been an important driver for the development of superconducting technology. New high temperature superconductors (HTS), which have very high values of the upper critical field Hc2, show promise for magnets generating fields greater than 25 T, such as those required for muon cooling [1]. (Rare Earth)Ba2Cu3Oy (REBCO) coated conductor is an HTS material which is well suited to these needs; however it requires characterization in the low temperature (4.2 K), high magnetic field regime. We are proposing to measure electro-mechanical and magnetic properties, including angular field dependence of commercially available REBCO conductor. Here we present results of initial testing to characterize commercially available REBCO coated conductors at 77 K, including critical current and quench testing to calculate minimum the quench energy (MQE) and normal zone propagation velocity (NZPV).