LBNL, Berkeley, California
SLAC, Menlo Park, California
The scientific potential of femtosecond x-ray pulses at linac-driven FELs such as the LCLS is tremendous. Time-resolved pump-probe experiments require a measure of the relative arrival time of each x-ray pulse with respect to the experimental pump laser. In order to achieve this, precise synchronization is required between the arrival time diagnostic and the laser which are often separated by hundreds of meters. We describe an optical timing system based on stabilized fiber links which has been developed for the LCLS to provide this synchronization. Preliminary results show stability of the timing distribution at the sub-10 fsec level and overall synchronization of the x-rays and pump laser of less than 40 fsec. We present details of the implementation and LCLS and potential for future development.
CLASSE, Ithaca, New York
CERN, Geneva
Carleton University, College of Natural Sciences, Ottawa, Ontario
Purdue University, West Lafayette, Indiana
LBNL, Berkeley, California
Grove City College, Grove City, Pennsylvania
INFN/LNF, Frascati (Roma)
ASCo, Clayton, Victoria
KEK, Ibaraki
Clarkson University, Potsdam, New York
BNL, Upton, Long Island, New York
ANL, Argonne
CalPoly, San Luis Obispo, CA
Cockcroft Institute, Warrington, Cheshire
SLAC, Menlo Park, California
Fermilab, Batavia
Technion, Haifa
Loyola University, Chicago, Illinois
The Cornell Electron Storage Ring (CESR) has been reconfigured as a test accelerator (CesrTA) for a program of electron cloud (EC) research at ultra low emittance. The instrumentation in the ring has been upgraded with local diagnostics for measurement of cloud density and with improved beam diagnostics for the characterization of both the low emittance performance and the beam dynamics of high intensity bunch trains interacting with the cloud. Finally a range of EC mitigation methods have been deployed and tested. Measurements of cloud density and its impact on the beam under a range of conditions will be presented and compared with simulations. The effectiveness of a range of mitigation techniques will also be discussed.
LBNL, Berkeley, California
Stabilized optical fiber links have been under development for several years for high precision transmission of timing signals for remote synchronization of accelerator and laser systems. In our approach, a master clock signal is modulated on an optical carrier over a fiber link. The optical carrier is also used as the reference in a heterodyne interferometer which is used to precisely measure variations, mainly thermal, in the fiber length. The measured variations are used to correct the phase of the transmitted clock signal. We present experimental results showing sub-10 fsec relative stability of a 200 m link a sub-20 fsec stability of a 2.2 km link.
LBNL, Berkeley, California
SLAC, Menlo Park, California
Electron clouds impose limitations on current accelerators that may be more severe for future machines, unless adequate measures of mitigation are taken. Recently, it has been proposed to use feedback systems operating at high frequency (in the GHz range) to damp single-bunch transverse coherent oscillations that may otherwise be amplified during the interaction of the beam with ambient electron clouds. We have used the simulation package WARP-POSINST to study the growth rate and frequency patterns in space-time of the electron cloud driven transverse instability in the CERN SPS accelerator with, or without, an idealized feedback model for damping the instability. We will present our latest simulation results, contrast them with actual measurements and discuss the implications for the design of the actual feedback system.
LBNL, Berkeley, California
UCB, Berkeley, California
Recent reports have identified the scientific requirements for a future soft x-ray light source and a high-repetition-rate FEL facility responsive to them is being studied at LBNL. The facility is based on a CW superconducting linear accelerator with beam supplied by a high-brightness, high-repetition-rate photocathode electron gun, and on an array of FELs to which the beam is distributed, each operating at high repetition rate and with even pulse spacing. Dependent on the experimental requirements, the individual FELs may be configured for either SASE, HGHG, EEHG, or oscillator mode of operation, and will produce high peak and average brightness x-rays with a flexible pulse format ranging from sub-femtoseconds to hundreds of femtoseconds. We are developing a design concept for a 10‐beamline, coherent, soft x‐ray FEL array powered by a 2.5 GeV superconducting accelerator operating with a 1 MHz bunch repetition rate. Electron bunches are fanned out through a spreader, distributing beams to an array of 10 independently configurable FEL beamlines with nominal bunch rates up to 100 kHz. Additionally, one beamline could be configured to operate at higher repetition rate.
SLAC, Menlo Park, California
LBNL, Berkeley, California
BNL, Upton, Long Island, New York
CERN, Geneva
The SPS at high intensities exhibits transverse single-bunch instabilities with signatures consistent with an Ecloud driven instability. We present recent MD data from the SPS, details of the instrument technique and spectral analysis methods which help reveal complex vertical motion that develops within a subset of the injected bunch trains. The beam motion is detected via wide-band exponential taper striplines and delta-σ hybrids. The raw sum and difference data is sampled at 50 GHz with 1.8 GHz bandwidth. Sliding window FFT techniques and RMS motion techniques show the development of large vertical tune shifts on portions of the bunch of nearly 0.025 from the base tune of 0.185. Results are presented via spectrograms and rms bunch slice trajectories to illustrate development of the unstable beam and time scale of development along the injected bunch train. The study shows that the growing unstable motion occupies a very broad frequency band of 1.2 GHz. These measurements are compared to numerical simulation results, and the system parameter implications for an Ecloud feedback system are outlined.