A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Bulgheroni, W.

Paper Title Page
WEPD026 In-situ Magnetic Correction for Cryogenic Undulators 3147
 
  • T. Tanaka, H. Kitamura
    RIKEN/SPring-8, Hyogo
  • A. Anghel, M. Bruegger, W. Bulgheroni, B. Jakob, T. Schmidt
    PSI, Villigen
  • A. Kagamihata, T. Seike
    JASRI/SPring-8, Hyogo-ken
 
 

The cryogenic permanent magnet undulator (CPMU) is an insertion device in which permanent magnets are cooled down to cryogenic temperature (CT) to improve the magnetic performances. Although CPMUs are realized by a slight modification of in-vacuum undulators (IVUs), we have several technical challenges to be overcome. Among them, the most important one is how to ensure the magnetic performance, in other words, how to measure the magnetic field at CT, and how to correct it if necessary. A new method of the phase-error correction has been proposed at SPring-8, in which the gap variation is corrected by adjusting mechanically the in-vacuum beam. What is important in this method is that the correction can be done at CT without breaking the vacuum, i.e., an 'in-situ' field correction is possible. The correction method has been tested to check the feasibility using the new CPMU with a magnetic period of 14 mm and a magnetic length of 1.7 m constructed for Swiss Light Source. In this paper, the principle and results are described together with the details of the new measurement system SAFALI (self aligned field analyzer with laser instrumentation) for the field measurement of CPMUs.